The DSE7310 is a generator-set controller. It is used on generator sets from Cummins/Onan, Himoinsa, Hipower, Igsa, MTU, Wacker Neuson and Winco, including the C20 D5R, C40 D5R, C60 D5R and HJW-155 T6.
| Communications | USB Connectable, RS485 |
|---|---|
| Digital inputs | 9-24 w/DSE 2130 |
| Relay outputs | 6-80 w/DSE 2751 |
| Protections | Engine RPM, Low Oil Pressure Shutdown Only, High Coolant Temperature Shutdown Only, Overspeed, Underspeed, Overcrank, Charging Alternator Failure Optional, CAN ECU Shutdown |
| Symptom | Cause | Remedy |
|---|---|---|
| Low Oil Pressure | Shutdown Only | |
| High Coolant Temperature | Shutdown Only | |
| Overspeed | X | |
| Underspeed | X | |
| Overcrank | X | |
| Charging Alternator Failure | Optional | |
| Voltage (L-N) | One L-N or L-L | |
| Overvoltage | X | |
| Undervoltage | X | |
| Frequency | X | |
| Overfrequency | X | |
| Underfrequency | X | |
| Phase Imbalance | Disabled | |
| Amp Display/Shutdown | - | X |
| kW, kVa, kVAr, pf Display | - | X |
| kWh, kVAh, kVArh Display | - | X |
| Generator Phase Sequence | - | X |
| Earth Current | - | Optional |
| Emergency Stop | X | |
| Battery Voltage | - | X |
| Battery Over/Under Voltage | - | X |
| Battery Charger Failure | - | Optional |
Fault codes and symptom→remedy steps extracted from this controller’s service/owner documentation; verify against the official manual before servicing. Extracted directly from this controller's manual.
Used across brands: Cummins/Onan, Himoinsa, Hipower, Igsa, MTU, Wacker Neuson, Winco