Specifications
| Fuel | natural gas/LP |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 208 kW |
| Controller | DSE7310 |
| Oil capacity | 28.5 L |
| Alternator | Stamford/AvK UCDI 274 K - N.G. / UCI 247 H - N.G. |
| Voltage options | 120 V, 208 V, 240 V, 277 V, 480 V, 600 V |
| Phase | 3 |
| Power factor | 0.8 |
| Sound level | 76.0 dBA |
Engine
| Oil capacity | 28.5 L |
|---|---|
| Coolant capacity | 25.0 L |
| Displacement | 11.1 L |
| Aspiration | Turbo |
| Rated speed | 1800 rpm |
Same engine, other brands
1 brandThe Power Solutions International 11.1L CAC in this set also powers 2 generator sets sold under 1 other brand. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.
| Brand | Models |
|---|---|
| MTU | 6R0185 GS200, MTU 6R0185 GS200 |
Maintenance & consumables
for the Power Solutions International 11.1L CAC| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Dry, replacable cartridge | — | |||
| Fuel filter | N/A | — | |||
| Oil filter | Replaceable Spin-On | ×1 | — | ||
| Battery | 150 AH | — | |||
| Belt | N/A | — | |||
| Coolant | N/A | — | |||
| Oil | SAE 15W-40 Low Ash (.25 - 5% by wt) | 26.5 quarts | — | ||
| Spark plug | N/A | — |
Common questions
What is the power rating of the Hipower HNG 210 T6?
The Hipower HNG 210 T6 is rated 208 kW standby.
Which engine powers the Hipower HNG 210 T6?
The Hipower HNG 210 T6 is powered by the Power Solutions International 11.1L CAC engine.
What kind of fuel does the Hipower HNG 210 T6 run on?
The Hipower HNG 210 T6 runs on natural gas/LP.
What's the oil capacity on a Hipower HNG 210 T6?
The Power Solutions International 11.1L CAC engine in the Hipower HNG 210 T6 has an oil capacity of 28.5 liters.
What is the coolant capacity of the Hipower HNG 210 T6?
The Hipower HNG 210 T6 cooling system holds 25 liters (6.6 US gallons) for the engine, per the manufacturer specification sheet.
What is the sound level of the Hipower HNG 210 T6?
The Hipower HNG 210 T6 is rated at 76.0 dBA, per the manufacturer specification sheet.
What voltages is the Hipower HNG 210 T6 available in?
The Hipower HNG 210 T6 is offered in 120 V, 208 V, 240 V, 277 V, 480 V, 600 V, 3-phase.
What alternator comes on the Hipower HNG 210 T6?
The Hipower HNG 210 T6 uses a Stamford/AvK UCDI 274 K - N.G. / UCI 247 H - N.G. alternator.
Available documents
This page was generated from the 2 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.