Specifications
| Fuel | natural gas/LP |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 159 kW |
| Controller | DSE7310 |
| Oil capacity | 28.0 L |
| Alternator | Stamford/AvK UCI 274 H / UCI 274 F (4-pole, Class H insulation) |
| Voltage options | 120/208 V, 120/240 V, 277/480 V, 347/600 V |
| Phase | 3 |
| Power factor | 0.8 |
| Circuit breaker | 400 A |
| Battery cranking | 900 CCA |
| Battery voltage | 24 V |
| Coolant capacity | 102.7 L |
| Sound level | 76.0 dBA |
Engine
| Oil capacity | 25.0 L |
|---|---|
| Coolant capacity | 22.5 L |
| Displacement | 4.92 L |
| Aspiration | Turbo Charge Air Cooled |
| Rated speed | 1800 rpm |
Maintenance & consumables
for the Power Solutions International 8.1LT| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | — | ||||
| Fuel filter | — | ||||
| Oil filter | ×1 | — | |||
| Battery | — | ||||
| Belt | — | ||||
| Coolant | — | ||||
| Oil | — | ||||
| Spark plug | — |
Common questions
How many kW is the Hipower HNG 160 T6?
The Hipower HNG 160 T6 is rated 159 kW standby.
Which engine powers the Hipower HNG 160 T6?
The Hipower HNG 160 T6 is powered by the Power Solutions International 8.1LT engine.
What fuel does the Hipower HNG 160 T6 use?
The Hipower HNG 160 T6 runs on natural gas/LP.
How much oil does the Hipower HNG 160 T6 take?
The Power Solutions International 8.1LT engine in the Hipower HNG 160 T6 has an oil capacity of 25.0 liters.
What is the coolant capacity of the Hipower HNG 160 T6?
The Hipower HNG 160 T6 cooling system holds 102.7 liters (27.1 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
How loud is the Hipower HNG 160 T6?
The Hipower HNG 160 T6 is rated at 76.0 dBA, per the manufacturer specification sheet.
What voltage does the Hipower HNG 160 T6 produce?
The Hipower HNG 160 T6 is offered in 120/208 V, 120/240 V, 277/480 V, 347/600 V, 3-phase.
How many cold cranking amps does the Hipower HNG 160 T6 require?
The Hipower HNG 160 T6 uses 24 V each, 900 CCA, per the manufacturer specification sheet.
Which alternator is fitted to the Hipower HNG 160 T6?
The Hipower HNG 160 T6 uses a Stamford/AvK UCI 274 H / UCI 274 F alternator. It has 4 poles. Insulation class H.
Parts
1| Part # | Description | Qty | System | |
|---|---|---|---|---|
| 777-10165R | NEMA 3R/IP67 0.09' aluminum panel, black powder coated, weather proof rated; individual Square-D QOU branch breakers; 2 x 20A 125V NEMA 5-20 GFCI duplex receptacles; 3 x 50A 125/250V CS6369 twist-lock receptacles & Lexan covers; 50A California style twist lock (1Ф only); 2 sets 400A single pin Camlocks rated 4,000A with snap covers; color coded Camlocks 3Ф - 5W black, red, blue, white & green; pad lockable 1/4 turn door access with cable trap; auxiliary bus bars with mechanical lugs; 1 dual lug per phase; mechanical lugs up to 250MCM cable. | 1 | Service part / kit | Amazon eBay |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Available documents
This page was generated from the 2 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.