HomeControllersAPM603

APM603 Controller

The APM603 is a generator-set controller. It is used on generator sets from Doosan and Kohler, including the 100REOZJ, 1250REOZM, 1250ROZMC and 150REOZJF.

143
Generator sets
2
Brands
80–4000 kW
Power range
4
Fuel types

Troubleshooting

6

Fault codes

CodeMeaning
M3.212APM INTERNAL power BATTERY WARNING

Symptoms & remedies

SymptomRemedy
Battery acid cleanupAdd 500 g (1 lb.) of bicarbonate of soda to a container with 4 L (1 gal.) of water and mix the neutralizing solution. Pour the neutralizing solution on the spilled battery acid until all evidence of a chemical reaction has ceased. Flush the resulting liquid with water and dry the area.
Battery acid on skinFlush the affected area with large quantities of clean water and seek medical aid if necessary.
Battery acid splashes in the eyesImmediately flush the affected area for 15 minutes with large quantities of clean water. Seek immediate medical aid.
Battery short circuitsDisconnect the battery before generator set installation or maintenance. Remove all jewelry before servicing the equipment. Use tools with insulated handles. Remove the negative (–) lead first when disconnecting the battery. Reconnect the negative (–) lead last when reconnecting the battery. Never connect the negative (–) battery cable to the positive (+) connection terminal of the starter solenoid. Do not test the battery condition by shorting the terminals together.
Servicing the air cleanerDo not operate the generator set with the air cleaner removed.

Fault codes and symptom→remedy steps extracted from this controller’s service/owner documentation; verify against the official manual before servicing. Aggregated from the service documentation of generator sets built on this controller.