Transfer Switches - LakeShore Repair Guides
24 step-by-step procedures compiled from Transfer Switches - LakeShore service manuals.
Note: Field adjustment can only be considered approximate if potentiometers are set us-
General procedure
INSTALLATION
General procedure
MODE: Press to advance to next mode. Sequence is: CLK, SCH, AUTO, MAN, SKIP. In
General procedure
ELECTRICAL HAZARD EXITS. DO NOT ATTEMPT ANY REPAIRS OR AD-
General procedure
IN INSTALLATION AND USE OF THIS PRODUCT, COMPLY WITH
General procedure
IN INJURY OR DEATH. DO NOT ATTEMPT ANY REPAIRS OR
General procedure
ADJUSTMENTS TO THIS EQUIPMENT WITHOUT FIRST TAKING
General procedure
3. The adjustment of the operating mechanism
General procedure
The troubleshooting procedures outlined here are designed to test the control circuit and the oper-
General procedure
1. Maintenance Disconnect Switch (MDS)
General procedure
Verify that the maintenance disconnect switch is in the "NORMAL" position.
General procedure
Motor Assembly (less than 1600 amp)
General procedure
The disassembly procedure of the mechanism is the reverse of the above. However, it is recom-
General procedure
Motor Assembly (1600 Amps and Larger)
General procedure
The auxiliary microswitches are mounted internally to the molded case switch. Internal mounting
General procedure
Note: Field adjustment can only be considered approximate if potentiometers are set us-
General procedure
INSTALLATION
General procedure
2. Mount the enclosure at eye level using screws or other suitable fastening device. Bring
General procedure
MODE: Press to advance to next mode. Sequence is: CLK, SCH, AUTO, MAN, SKIP. In
General procedure
IN INSTALLATION AND USE OF THIS PRODUCT, COMPLY WITH
General procedure
ADJUSTMENTS TO THIS EQUIPMENT WITHOUT FIRST TAKING
General procedure
3. The adjustment of the operating mechanism
General procedure
The troubleshooting procedures outlined here are designed to test the control circuit and the oper-
General procedure
Transfer Switch Installation
General procedure