Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›MODE: Press to advance to next mode. Sequence is: CLK, SCH, AUTO, MAN, SKIP. In

Transfer Switches - LakeShore — MODE: Press to advance to next mode. Sequence is: CLK, SCH, AUTO, MAN, SKIP. In

A Transfer Switches - LakeShore service procedure — check it applies to your exact model before use.

Browse Transfer Switches - LakeShore generators & specs →

Procedure

  1. 1. Press MODE key until display shows CLK.
  2. 2. Press DAY key to select current day. Press HOUR key to select current hour. Check A
  3. 1. If display does not show SCH, press mode key until display shows SCH.
  4. 2. Press HOUR and MIN keys for the first ON setting (check for AM or PM).
  5. 3. Press ENTER key to store the information and display will indicate it is ready to receive
  6. 4. Press HOUR and MIN keys for the first OFF setting. Then press ENTER key to store the
  7. 5. Proceed for up to 7 ON and 7 OFF setpoints. Then press MODE key and unit will go to the
  8. 1. Press mode key until display shows SKIP. Press DAY key and M (Monday) starts flashing.
  9. 1. CLOCK - ALTER TIME
  10. 2. SCHEDULE - REVIEW
  11. 3. SCHEDULE - MODIFY
  12. 4. SKIP DAYS - ADD/DELETE
  13. 9. TROUBLESHOOTING GUIDE
  14. 1. A wiring diagram for the switch must be available.
  15. 2. Normal and Emergency voltage and frequency must be available and within the
  16. 3. Control circuit voltage (if transformers are used) must be 110 to 125 volts.
  17. 4. Connections to the PFR must be correct and the relay must be adjusted to pick up
  18. 5. All timers must be turned down or consideration given to them while the tests are
  19. 6. If trip units are included in the switch, they must be reset if previously tripped due
  20. 7. All electrical connections must be tight and in accordance with the wiring diagram.

Source: manual:Styles 2, 3 and T-200 New Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.