Home›Generac›Generac SG230

Generac SG230 Generator Set

The Generac SG230 is a 230 kW (288 kVA) Natural Gas standby generator set powered by a Generac 14.2L engine. It is available at 120/208 V, 120/240 V, 277/480 V and 346/600 V, 3-phase, 60 Hz and rated 798 A. It holds about 34.3 L (9.1 gal) of oil and 71.9 L (19.0 gal) of coolant, with a maximum ambient rating of 43.3 °C. Starting uses 1 group-2 battery at 12 V. The set measures 3524.1×1463.1×1728.3 mm (138.7×57.6×68.0 in), weighs about 2887 kg (6365 lb) and produces 84.1 dBA at 7 m.

230 kW
Standby
14.17 L
Displacement
34.3 L
Oil capacity
3
Document types

How to read your Generac serial & model number →

Specifications

FuelNatural Gas
Frequency60.0 Hz
Standby power230 kW
Standby kVA288
Prime power207 kW
ControllerDigital H Control Panel - Dual 4x20 Display
Oil capacity34.3 L
Alternator520
Voltage options120/208 V, 120/240 V, 277/480 V, 346/600 V
PhaseThree-Phase
Rated current798 A
Power factor0.8
Battery group2
Battery voltage12 V
Battery quantity1
Coolant capacity71.9 L
Max ambient43.3 °C
Dimensions (L×W×H)3524×1463×1728 mm
Dry weight2887 kg
Sound level84.1 dBA @ 7 m

Engine

Generac 14.2L
Oil capacity34.3 L
Coolant capacity71.9 L
Displacement14.17 L
AspirationTurbocharged/Aftercooled
Rated speed1800 rpm

Filters & service parts

model family
ItemSpecCapacityPart #Interval
Oil filterFull-flow cartridge—
Battery8D—
CoolantPressurized Closed Recovery—
FuelNatural Gas—
OilGear—

Compiled from this model's family documentation — may include parts for closely-related variants. Confirm the exact part for your serial number.

Common questions

What is the power rating of the Generac SG230?

The Generac SG230 is rated 230 kW standby (288.0 kVA).

What engine is in the Generac SG230?

The Generac SG230 is powered by the Generac 14.2L engine.

What kind of fuel does the Generac SG230 run on?

The Generac SG230 runs on Natural Gas.

How much oil does the Generac SG230 take?

The Generac 14.2L engine in the Generac SG230 has an oil capacity of 34.3 liters.

How much coolant does the Generac SG230 hold?

The Generac SG230 cooling system holds 71.9 liters (19.0 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.

What is the prime power rating of the Generac SG230?

The Generac SG230 is rated 207 kW prime (259 kVA), against 230 kW standby.

What is the sound level of the Generac SG230?

The Generac SG230 is rated at 84.1 dBA at 7 m, per the manufacturer specification sheet.

How much does the Generac SG230 weigh?

The Generac SG230 has a dry weight of 2887 kg (6364 lb).

What voltages is the Generac SG230 available in?

The Generac SG230 is offered in 120/208 V, 120/240 V, 277/480 V, 346/600 V, Three-Phase-phase.

What battery does the Generac SG230 use?

The Generac SG230 uses 1 battery, 12 V each, group 2, per the manufacturer specification sheet.

What alternator comes on the Generac SG230?

The Generac SG230 uses a 520 alternator.

Fuel consumption

RatingLoadL/hgal/h
Standby25%971.027.5
Standby50%178.2947.1
Standby75%240.7563.6
Standby100%297.5378.6

Available documents

Engine spec — 0195640SBY SG230 (Generac)Spec sheet — 0K4296 SG230 12-9L 60Hz (Generac)Spec sheet — 0l0028-a-sg230-14-2l-60hz (Generac)Spec sheet — Generac 230kW SG230 Gas Generator 14.2L (Generac)Reference — 0172630SBY (Generac)

This page was generated from the 5 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.