Specifications
| Fuel | Natural Gas |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 150 kW |
| Standby kVA | 188 |
| Prime power | 135 kW |
| Emissions | EPA Certified |
| Controller | PowerZone Pro Sync |
| Oil capacity | 8.5 L |
| Alternator | K0150124Y21 K0150124Y21 |
| Voltage options | 120/240 V, 120/208 V, 277/480 V, 346/600 V |
| Phase | Single-Phase |
| Rated current | 600 A |
| Power factor | 1.0pf |
| Circuit breaker | 600 A |
| Battery group | See Battery Index 0161970SBY |
| Battery cranking | 1000 CCA |
| Battery voltage | 12 VDC V |
| Battery quantity | 1 |
| Coolant capacity | 6.34 L |
| Max ambient | 122 (50) °C |
| Dimensions (L×W×H) | 2×1×1 mm |
| Dry weight | 1 kg |
| Sound level | 81.1 dBA @ 1 m |
| Fuel tank | 0.0 L |
| Tank runtime | N/A hr |
Engine
| Oil capacity | 8.5 L |
|---|---|
| Coolant capacity | 6.34 L |
| Displacement | 8.9 L |
| Aspiration | Turbocharged/Aftercooled |
| Rated speed | 1 rpm |
Common questions
How many kW is the Generac SG150?
The Generac SG150 is rated 150 kW standby (188.0 kVA).
What engine does the Generac SG150 use?
The Generac SG150 is powered by the Generac G18/G26 engine.
What fuel type does the Generac SG150 take?
The Generac SG150 runs on Natural Gas.
What's the oil capacity on a Generac SG150?
The Generac G18/G26 engine in the Generac SG150 has an oil capacity of 8.5 liters.
How much coolant does the Generac SG150 hold?
The Generac SG150 cooling system holds 6.34 liters (1.7 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the prime power rating of the Generac SG150?
The Generac SG150 is rated 135 kW prime (169 kVA), against 150 kW standby.
What is the sound level of the Generac SG150?
The Generac SG150 is rated at 81.1 dBA at 1 m, per the manufacturer specification sheet.
How much does the Generac SG150 weigh?
The Generac SG150 has a dry weight of 1 kg (2 lb).
What voltages is the Generac SG150 available in?
The Generac SG150 is offered in 120/240 V, 120/208 V, 277/480 V, 346/600 V, Single-Phase-phase.
How many cold cranking amps does the Generac SG150 require?
The Generac SG150 uses 1 battery, 12 VDC V each, 1000 CCA, group See Battery Index 0161970SBY, per the manufacturer specification sheet.
What alternator comes on the Generac SG150?
The Generac SG150 uses a K0150124Y21 K0150124Y21 alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 25% | 780.0 | 22.1 |
| Prime | 50% | 1260.0 | 35.7 |
| Prime | 75% | 180.19 | 47.6 |
| Prime | 100% | 218.8 | 57.8 |
| Standby | 25% | 6.7 | 20.0 |
| Standby | 50% | 11.4 | 36.1 |
| Standby | 75% | 15.7 | 50.0 |
| Standby | 100% | 20.0 | 75.7 |
Available documents
This page was generated from the 8 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.