Specifications
| Fuel | Natural Gas or L.P. Vapor |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 100 kW |
| Standby kVA | 100 |
| Prime power | 80 kW |
| Emissions | EPA Certified |
| Controller | Digital H Control Panel - Dual 4x20 Display |
| Oil capacity | 8.0 L |
| Alternator | 8.1 GN |
| Voltage options | 120/240 V, 120/208 V, 277/480 V |
| Phase | 3-phase |
| Rated current | 333.3 A |
| Power factor | 0.8 |
| Circuit breaker | 333.3 A |
| Battery group | 1 |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Coolant capacity | 11.7 L |
| Max ambient | 75 °C |
| Dimensions (L×W×H) | 2394×1016×1206 mm |
| Dry weight | 936 kg |
| Sound level | 83.8 dBA @ N/A m |
| Tank runtime | N/A hr |
Engine
| Oil capacity | 8.0 L |
|---|---|
| Coolant capacity | 24.2 L |
| Displacement | 8.1 L |
| Aspiration | Naturally Aspirated |
Common questions
How many kW is the Generac SG100?
The Generac SG100 is rated 100 kW standby (100.0 kVA).
What engine does the Generac SG100 use?
The Generac SG100 is powered by the Generac 8.1 GN engine.
What fuel does the Generac SG100 use?
The Generac SG100 runs on Natural Gas or L.P. Vapor.
How much oil does the Generac SG100 take?
The Generac 8.1 GN engine in the Generac SG100 has an oil capacity of 8.0 liters.
How much coolant does the Generac SG100 hold?
The Generac SG100 cooling system holds 11.7 liters (3.1 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the prime power rating of the Generac SG100?
The Generac SG100 is rated 80 kW prime (80 kVA), against 100 kW standby.
How loud is the Generac SG100?
The Generac SG100 is rated at 83.8 dBA at N/A m, per the manufacturer specification sheet.
How much does the Generac SG100 weigh?
The Generac SG100 has a dry weight of 936 kg (2063 lb).
What voltages is the Generac SG100 available in?
The Generac SG100 is offered in 120/240 V, 120/208 V, 277/480 V, 3-phase-phase.
What size battery does the Generac SG100 need?
The Generac SG100 uses 1 battery, 12 V each, group 1, per the manufacturer specification sheet.
What alternator does the Generac SG100 use?
The Generac SG100 uses a 8.1 GN alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 100% | 11.4 | 3.01 |
| Standby | 25% | 494.0 | 14.1 |
| Standby | 50% | 759.6 | 21.5 |
| Standby | 75% | 1011.1 | 28.6 |
| Standby | 100% | 14.1 | 3.72 |
Available documents
This page was generated from the 6 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.