Generac G0072100 — Servicing the Air Cleaner
Maintenance · air cleaner / airbox
For the Generac G0072100, from the Generac owner's manual.
Applies to: Generac G0072100, Generac G-Force 400 Series engine, Generac G-Force 800 Series engine, Generac G-Force 1000 Series engine
Before you start
- Risk of fire. Never operate engine without the air cleaner installed.
- Explosion and fire. Never clean air filter element with gasoline or low flash-point detergents.
Parts for this job
Part numbers from the service-parts list for Generac G0072100. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Lift lid and press OFF to stop generator.
- Remove front panel.
- Remove cover clips and air cleaner cover.
- Remove old air filter element and discard.
- Thoroughly clean air cleaner enclosure of any dust or debris.
- Install a new air filter element.
- Install air cleaner cover and fasten cover clips.
- 14-24 kW units only: verify air inlet duct is correctly connected to air cleaner cover.
- Press AUTO to return unit to AUTO.
Specs & values
- Air filter 0E9371A Amazon eBay $19.99 (10 kW); 0J8478 Amazon eBay $20.00 NAPA $24.32 KuduParts $15.00 (14-24 Amazon eBay kW)
Full service-parts list: Generac G0072100 →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.