Generac G0072100 — Performing Fuel System Leak Test
Maintenance
For the Generac G0072100, from the Generac owner's manual.
Applies to: Generac G0072100, Generac G-Force 400 Series engine, Generac G-Force 800 Series engine, Generac G-Force 1000 Series engine
Before you start
- Explosion and fire. Fuel and vapors are extremely flammable and explosive. No leakage of fuel is permitted. Keep fire and spark away.
Procedure
- Perform a final fuel system leak test after generator installation, testing from supply to regulator.
- Spray all connection points with a non-corrosive gas leak detection fluid.
- Verify the solution is not blown away and does not form bubbles.
- Best practice: perform during normally-scheduled maintenance.
Tools required
- non-corrosive gas leak detection fluid Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Generac G0072100 →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.