Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Changing the Engine Air Cleaner (12,14,16,17,20kW)

Generac — Changing the Engine Air Cleaner (12,14,16,17,20kW)

Maintenance

From a Generac owner's manual covering: GH-410, GT-530, GT-990, GT-999. Check it applies to your exact model before use.

Applies to: Generac GH-410, Generac GH-410 engine, Generac GT-530 engine, Generac GT-990 engine, Generac GT-999 engine

Parts for this job

Part numbers from the service-parts list for Generac GH-410. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Lift roof and remove door.
  2. Turn two screws counterclockwise to loosen.
  3. Remove cover and air filter.
  4. Wipe away dust or debris from air box.
  5. Install new air cleaner into air box.
  6. Install cover and turn two screws clockwise to tighten.

Full service-parts list: Generac GH-410 →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →