Cummins/Onan M1894s / M1895s — Starting
Operation · Generator set
For the Cummins/Onan M1894s / M1895s, from the Cummins/Onan service manual.
Applies to: Cummins/Onan M1894s, Cummins/Onan M1895s, Cummins/Onan MCGBA, Cummins/Onan MCGCA, Cummins/Onan MCGDA, Cummins/Onan MCGDB, Cummins/Onan MCGGA
Before you start
- Excessive cranking can overheat the starter motor and cause it to fail. Do not crank the engine for more than 30 seconds at a time. Wait two minutes before trying again.
Procedure
- Hold the control panel switch in the START position.
- Release the switch when the engine starts.
- The starter will disengage automatically when the engine starts up.
Full service-parts list: Cummins/Onan M1894s →, Cummins/Onan M1895s →, Cummins/Onan MCGBA →, Cummins/Onan MCGCA →, Cummins/Onan MCGDA →, Cummins/Onan MCGDB →, Cummins/Onan MCGGA →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.