Cummins/Onan M1894s / M1895s — Magnetic Speed Pickup Installation
Installation
For the Cummins/Onan M1894s / M1895s, from the Cummins/Onan owner's manual.
Applies to: Cummins/Onan M1894s, Cummins/Onan M1895s, Cummins/Onan MCGBA, Cummins/Onan MCGCA, Cummins/Onan MCGDA, Cummins/Onan MCGDB, Cummins/Onan MCGGA
Procedure
- Bar the engine until a gear tooth on the flywheel lines up in the center of the mounting hole.
- Thread the sensor in gently by hand until it just touches the gear tooth.
- Back it out one quarter turn and set the lock nut.
Specs & values
- Back the sensor out one quarter turn after it touches the gear tooth.
Full service-parts list: Cummins/Onan M1894s →, Cummins/Onan M1895s →, Cummins/Onan MCGBA →, Cummins/Onan MCGCA →, Cummins/Onan MCGDA →, Cummins/Onan MCGDB →, Cummins/Onan MCGGA →
Source: Cummins/Onan owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.