Specifications
| Fuel | Natural Gas |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 1300 kW |
| Standby kVA | 1625 |
| Alternator | PMG |
| Voltage options | 480 V |
| Phase | 3 |
Filters & service parts
model family| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Belt | New Belt, N (lbf.): 1334 ±111 (300 ±25) | — |
Compiled from this model's family documentation — may include parts for closely-related variants. Confirm the exact part for your serial number.
Service specifications
30| Type | Item | Value | Unit | Condition |
|---|---|---|---|---|
| Other | 10 in. weld flange bolt circle diameter B | 361.95 | mm (14.25 in.) | |
| Other | 10 in. weld flange outside diameter C | 406.4 | mm (16.0 in.) | |
| Other | 10 in. weld flange quantity of bolts / bolt hole diameter D | 12, 25.40 | mm (1.00 in.) | |
| Other | 12 in. weld flange bolt circle diameter B | 431.80 | mm (17.00 in.) | |
| Other | 12 in. weld flange outside diameter C | 482.6 | mm (19.0 in.) | |
| Other | 12 in. weld flange quantity of bolts / bolt hole diameter D | 12, 25.40 | mm (1.00 in.) | |
| Other | 14 in. weld flange bolt circle diameter B | 476.25 | mm (18.75 in.) | |
| Other | 14 in. weld flange outside diameter C | 533.4 | mm (21.0 in.) | |
| Other | 14 in. weld flange quantity of bolts / bolt hole diameter D | 12, 28.58 | mm (1.13 in.) | |
| Other | 16 in. weld flange bolt circle diameter B | 539.75 | mm (21.25 in.) | |
| Other | 16 in. weld flange outside diameter C | 596.9 | mm (23.5 in.) | |
| Other | 16 in. weld flange quantity of bolts / bolt hole diameter D | 16, 28.58 | mm (1.13 in.) | |
| Other | 18 in. weld flange bolt circle diameter B | 577.85 | mm (22.75 in.) | |
| Other | 18 in. weld flange outside diameter C | 635.0 | mm (25.0 in.) | |
| Other | 18 in. weld flange quantity of bolts / bolt hole diameter D | 16, 31.75 | mm (1.25 in.) | |
| Other | 20 in. weld flange bolt circle diameter B | 635.00 | mm (25.00 in.) | |
| Other | 20 in. weld flange outside diameter C | 698.5 | mm (27.5 in.) | |
| Other | 20 in. weld flange quantity of bolts / bolt hole diameter D | 20, 31.75 | mm (1.25 in.) | |
| Other | 5 in. weld flange bolt circle diameter B | 215.90 | mm (8.50 in.) | |
| Other | 5 in. weld flange outside diameter C | 241.30 | mm (9.50 in.) | |
| Other | 5 in. weld flange quantity of bolts / bolt hole diameter D | 8, 22.23 | mm (0.88 in.) | |
| Other | 6 in. weld flange bolt circle diameter B | 254.0 | mm (10.0 in.) | |
| Other | 6 in. weld flange outside diameter C | 279.4 | mm (11.0 in.) | |
| Other | 6 in. weld flange quantity of bolts / bolt hole diameter D | 8, 22.23 | mm (0.88 in.) | |
| Other | 8 in. weld flange bolt circle diameter B | 298.45 | mm (11.75 in.) | |
| Other | 8 in. weld flange outside diameter C | 342.9 | mm (13.5 in.) | |
| Other | 8 in. weld flange quantity of bolts / bolt hole diameter D | 8, 22.23 | mm (0.88 in.) | |
| Other | Weld flange angle A (10, 12, 14 in. nominal pipe size) | 30 | deg. | |
| Other | Weld flange angle A (16, 18, 20 in. nominal pipe size) | 22.5 | deg. | |
| Other | Weld flange angle A (5, 6, 8 in. nominal pipe size) | 45 | deg. |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Fault codes
80| Code | Name | Meaning | Severity | Action |
|---|---|---|---|---|
| 0 | No faults present | Decision-Maker 3+ Shutdown Fault Code | Info | |
| 0/0/0/0 | No error | Decision-Maker 8000 Error List | ||
| 0/0/1/6 | Illegal access | Read (write) of the communication object. Object intended only for write (read). | ||
| 0/0/2/6 | Comm. Object nonexistent | Decision-Maker 8000 Error List | ||
| 1 | Master switch not in auto (warning) | Decision-Maker 3+ Shutdown Fault Code | Warning | |
| 10 | Low coolant temperature (warning) | Decision-Maker 3+ Shutdown Fault Code | Warning | |
| 100 | Genset S/N Mismatch Warning | Decision-Maker 550/6000 System Event Code | Warning | |
| 101 | Genset S/N Mismatch Shutdown | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 103 | Protective Relay Overvoltage | Decision-Maker 550/6000 System Event Code | ||
| 104 | Protective Relay Under Voltage | Decision-Maker 550/6000 System Event Code | ||
| 105 | Protective Relay Overfrequency | Decision-Maker 550/6000 System Event Code | ||
| 106 | Protective Relay Underfrequency | Decision-Maker 550/6000 System Event Code | ||
| 107 | Protective Relay Reverse Power | Decision-Maker 550/6000 System Event Code | ||
| 108 | Protective Relay Over Power | Decision-Maker 550/6000 System Event Code | ||
| 109 | Protective Relay Loss of Field | Decision-Maker 550/6000 System Event Code | ||
| 11 | Aux. delay | Decision-Maker 3+ Shutdown Fault Code | ||
| 110 | Protective Relay Overcurrent Vr | Decision-Maker 550/6000 System Event Code | ||
| 1100 | Overspeed | Decision-Maker 3500 Event ID 1; Level 4; FMI 16 | Shutdown | |
| 1102 | Low Oil Pressure Warning | Decision-Maker 3500 Event ID 1; Level 2; FMI 18 | Warning | |
| 1103 | Low Coolant Temperature Warning | Decision-Maker 3500 Event ID 1; Level 2; FMI 18 | Warning | |
| 1104 | Low Oil Level Warning | Decision-Maker 3500 Event ID 1; Level 2; FMI 18 | Warning | |
| 1105 | Low Coolant Level Shutdown | Decision-Maker 3500 Event ID 1; Level 4; FMI 18 | Shutdown | |
| 1106 | Low Fuel Warning | Decision-Maker 3500 Event ID 1; Level 2; FMI 18 | Warning | |
| 1107 | Low Battery Voltage | Decision-Maker 3500 Event ID 1; Level 2; FMI 18 | Warning | |
| 1109 | High Fuel Temperature Warning | Decision-Maker 3500 Event ID 1; Level 2; FMI 16 | Warning | |
| 111 | Reverse Power Shutdown | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 1110 | Low Fuel Pressure Warning | Decision-Maker 3500 Event ID 1; Level 2; FMI 18 | Warning | |
| 1114 | Low Coolant Pressure Warning | Decision-Maker 3500 Event ID 1; Level 2; FMI 18 | Warning | |
| 1115 | High Oil Temperature Warning | Decision-Maker 3500 Event ID 1; Level 2; FMI 6 | Warning | |
| 112 | Over Power Shutdown | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 113 | Loss of Field Shutdown | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 114 | Over Current Shutdown | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 115 | Common Protective Relay Output | Decision-Maker 550/6000 System Event Code | ||
| 116 | In Synch | Decision-Maker 550/6000 System Event Code | ||
| 117 | Breaker Trip | Decision-Maker 550/6000 System Event Code | ||
| 118 | Fuel Valve Relay | Decision-Maker 550/6000 System Event Code | ||
| 119 | Pre Lube Relay | Decision-Maker 550/6000 System Event Code | ||
| 12 | Aux. immediate | Decision-Maker 3+ Shutdown Fault Code | ||
| 120 | Air -Fuel Module Start | Decision-Maker 550/6000 System Event Code | ||
| 121 | Oil Temperature Loss of Signal | Decision-Maker 550/6000 System Event Code | ||
| 122 | High Oil Temperature Warning | Decision-Maker 550/6000 System Event Code | Warning | |
| 123 | Intake Air Temperature Loss of Signal | Decision-Maker 550/6000 System Event Code | ||
| 124 | High Intake Air Temperature Warning | Decision-Maker 550/6000 System Event Code | Warning | |
| 125 | High Intake Air Temperature Shutdown | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 126 | MDEC/ADEC Yellow Alarm | Decision-Maker 550/6000 System Event Code | Warning | |
| 127 | MDEC/ADEC Red Alarm | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 128 | MDEC/ADEC Block Heater Control | Decision-Maker 550/6000 System Event Code | ||
| 129 | Low Coolant Temperature Shutdown | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 13 | MDEC/ADEC yellow alarm (warning) | Decision-Maker 3+ Shutdown Fault Code | Warning | |
| 130 | MDEC/ADEC Load Shed Over Temperature | Decision-Maker 550/6000 System Event Code | ||
| 131 | Reserved For Future Use | Decision-Maker 550/6000 System Event Code | ||
| 132 | Engine Derate Active | Decision-Maker 550/6000 System Event Code | ||
| 133 | Engine Stalled | Decision-Maker 550/6000 System Event Code | ||
| 1334 | Under Voltage Shutdown (L1-L2) | Decision-Maker 3500 Event ID 1; Level 4; FMI 18 | Shutdown | |
| 1336 | Under Voltage Shutdown (L2-L3) | Decision-Maker 3500 Event ID 1; Level 4; FMI 18 | Shutdown | |
| 1338 | Under Voltage Shutdown (L3-L1) | Decision-Maker 3500 Event ID 1; Level 4; FMI 18 | Shutdown | |
| 134 | J1939 CAN Engine Shutdown | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 1358 | Under Frequency Shutdown | Decision-Maker 3500 Event ID 1; Level 4; FMI 18 | Shutdown | |
| 1374 | High Total Power Shutdown | Decision-Maker 3500 Event ID 1; Level 4; FMI 16 | Shutdown | |
| 139 | FirmwareUpgradeFault | Decision-Maker 3000 Event Code 139; Internal Fault | ||
| 14 | MDEC/ADEC red alarm | Decision-Maker 3+ Shutdown Fault Code | Shutdown | |
| 143 | WatchdogTimerExpired | Decision-Maker 3000 Event Code 143; Internal Fault | ||
| 144 | InternalFailure | Decision-Maker 3000 Event Code 144; Internal Fault | ||
| 145 | FileSystemError | Decision-Maker 3000 Event Code 145; Internal Fault | ||
| 146 | USBError | Decision-Maker 3000 Event Code 146; Internal Fault | ||
| 15 | Loss of ECM comms | Decision-Maker 3+ Shutdown Fault Code | Shutdown | |
| 16 | kW Overload | Decision-Maker 340 Alert Code | ||
| 1601 | Low Maximum Alternator Current | Decision-Maker 3500 Event ID 1; Level 4; FMI 18 | Shutdown | |
| 163 | TestEvent | Decision-Maker 3000 Event Code 163; Test Event | ||
| 17 | Under Frequency Warning | Decision-Maker 340 Alert Code | Warning | |
| 175 | No Oil Press1 Signal | Decision-Maker 550/6000 System Event Code | ||
| 176 | No Oil Press2 Signal | Decision-Maker 550/6000 System Event Code | ||
| 177 | No Cool Temp1 Signal | Decision-Maker 550/6000 System Event Code | ||
| 178 | No Cool Temp2 Signal | Decision-Maker 550/6000 System Event Code | ||
| 179 | Hi Cool Temp1 Shtdwn | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 18 | High Battery Voltage | Decision-Maker 340 Alert Code | ||
| 180 | Hi Cool Temp2 Shtdwn | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 181 | Oil Press1 Shutdown | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 182 | Oil Press2 Shutdown | Decision-Maker 550/6000 System Event Code | Shutdown | |
| 183 | Hi Cool Temp1 Warn | Decision-Maker 550/6000 System Event Code | Warning |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Procedures
6APM802 Connection Procedure (RS-485 or Ethernet) installation
⚠ Hazardous voltage. Will cause severe injury or death. Disconnect all power sources before opening the enclosure.
Tools: Belden #9841 or equivalent shielded twisted-pair cable
- Disable the generator set per safety precautions.
- Turn off and disconnect power to all devices in the system.
- Connect to RS-485 connections on TB10 or to the RJ45 port labeled Ethernet 3.
- Verify that the controller is OFF.
- Reconnect the engine starting battery, negative (--) lead last.
- Reconnect power to the battery charger, if equipped.
Controller Setup Procedure (Decision-Maker 550) installation
- Go to Menu 14—Programming Mode; enter local programming mode.
- Enter the controller access code.
- Go to Menu 13—Communications.
- Select Protocol Modbus0 or Modbus1.
- Enter Yes at the Modbus Online Y/N display.
- Choose Single or Converter connection type.
- Choose RS-232 or RS-485 for the primary port.
- Enter the network address (1-246).
- Select the same baud rate for all devices.
- Choose remote, local, or off programming mode.
- Enter the controller access code.
Decision-Maker 3000 Connection Procedure installation
⚠ Accidental starting can cause severe injury or death.
- Press the OFF button on the controller.
- Disconnect the power to the battery charger, if equipped.
- Disconnect the engine starting battery(ies), negative (--) lead first.
- Turn off and disconnect power to all devices in the system.
- Connect to communication port P21.
- Verify that the controller is OFF.
- Reconnect the engine starting battery, negative (--) lead last.
- Reconnect power to the battery charger, if equipped.
Decision-Maker 3500 Connection Procedure installation
⚠ Accidental starting can cause severe injury or death.
- Press the OFF button on the controller.
- Disconnect the power to the battery charger, if equipped.
- Disconnect the engine starting battery(ies), negative (--) lead first.
- Turn off and disconnect power to all devices in the system.
- Connect to communication port on TB12 (located in the junction box).
- Verify that the controller is OFF.
- Reconnect the engine starting battery, negative (--) lead last.
- Reconnect power to the battery charger, if equipped.
Modbus/Ethernet Converter Setup (MCP 3000) installation
- Set IP Address 192.168.255.33.
- Set Protocol to Modbus/RTU, Master attached.
- Connect the Ethernet port on the MCP PLC to the Ethernet side of the converter.
Procedure to Identify the Controller Application Code Version operation
- Access Menu 20: press 20 and the Enter key.
- Step through factory setup items until Code Version is displayed.
- Record the code version number.
- Press the Reset Menu key to exit the menu.
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Voltage reconnection
| Voltage | Phase | Connection | Leads | Notes |
|---|---|---|---|---|
| APM802 RS-485 connections on TB10 | Connector 7 (--) Blue; Connector 8 (+) Green. Shield: do not connect at TB10 or base module; tape to insulate unused end. | 120 ohm resistor located on the base module. | ||
| Decision-Maker 3+ RS-485 connection (TB5) | Connect A to --, B to +, and GND to shield. | Use Belden #9841 or equivalent cable. Termination resistor X-6058-27 (121 ohms) connect + to -- on last device in network. | ||
| Decision-Maker 3500 TB12 RS-485 connection | COM (+) White; COM (--) Black. Shield: do not connect at TB12 or DEC 3500; connect shield at RSA III P27 connection only. | Use Belden #9844 or equivalent cable. | ||
| Decision-Maker 550 / 6000 RS-485 connector | Connect + to +, -- to --, GND to shield between devices. Use Belden #9841 or equivalent cable. | Termination resistor X-6058-27 (121 ohms) connect + to -- on last device in network. | ||
| Decision-Maker 8000 RS-485 connections (customer connection area, bottom panel) | Blue, high (H) or positive (+), wire connects to the A terminal; Green, low (L) or negative (--), wire connects to the B terminal. COM terminal also present. | Pull up jumper, pull down jumper, and 120 ohm resistor for RS-485 are located on the controller base box. |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
What is the power rating of the Kohler 1300REZCK?
The Kohler 1300REZCK is rated 1300 kW standby (1625.0 kVA).
Which engine powers the Kohler 1300REZCK?
The Kohler 1300REZCK is powered by the HGM560 engine.
What fuel does the Kohler 1300REZCK use?
The Kohler 1300REZCK runs on Natural Gas.
What voltage does the Kohler 1300REZCK produce?
The Kohler 1300REZCK is offered in 480 V, 3-phase.
What alternator comes on the Kohler 1300REZCK?
The Kohler 1300REZCK uses a PMG alternator.
Repair guides
5- APM802 Connection Procedure (RS-485 or Ethernet)
- Controller Setup Procedure (Decision-Maker 550)
- Decision-Maker 3500 Connection Procedure
- Modbus/Ethernet Converter Setup (MCP 3000)
- Procedure to Identify the Controller Application Code Version
Step-by-step procedures compiled from the Kohler service manual for this model.
Parts
97| Part # | Description | Qty | System | |
|---|---|---|---|---|
| 16.20.401 | Nut for water pump impeller, main circuit | Impeller | buy | |
| 16.25.026 | Oil pump gear fixing nut | Pump | buy | |
| 16.25.372 | Oil pump gear fixing nut | Pump | buy | |
| 16.27.550 | Oil pump safety valve | Pump | buy | |
| 19.10.078 | Spark plug sleeve | Spark plug | buy | |
| 19.10.242 | Spark plug sleeve | Spark plug | buy | |
| 19.10.311 | Spark plug sleeve | Spark plug | Amazon eBay | |
| 70.10.301 | Turbocharger to manifold capscrew | Turbocharger | buy | |
| 70.10.401 | Turbocharger to manifold capscrew | Turbocharger | buy | |
| 70.50.408 | Water pump gear drive and bearing capscrew, main & auxiliary circuits | Pump | buy | |
| 70.50.432 | Water pump gear drive and bearing capscrew, main circuit | Pump | buy | |
| 15.10.077 | Bearing cap cross bolt | Service part / kit | buy | |
| 15.15.039 | Valve lifter adjusting screw | Service part / kit | buy | |
| 16.10.024 | Bearing capscrew | Service part / kit | buy | |
| 16.10.047 | Cylinder head nut | Service part / kit | buy | |
| 16.10.067 | Lifter guide | Service part / kit | buy | |
| 16.10.088 | Rocker arm shaft | Service part / kit | buy | |
| 16.10.146 | Axial thrust disk | Service part / kit | buy | |
| 16.10.147 | Axial thrust disk | Service part / kit | buy | |
| 16.10.155 | Bearing cap nut | Service part / kit | buy | |
| 16.10.166 | Bearing cap fixing stud | Service part / kit | Amazon eBay | |
| 16.10.296 | Bearing cap cross bolt | Service part / kit | buy | |
| 16.10.336 | External spring | Service part / kit | buy | |
| 16.10.337 | Internal spring | Service part / kit | buy | |
| 16.10.562 | Cylinder head nut | Service part / kit | buy | |
| 16.15.006 | Crankshaft rear output flange capscrew (flywheel) | Service part / kit | buy | |
| 16.15.082 | Flywheel capscrew | Service part / kit | buy | |
| 16.15.128 | Flywheel mounting capscrew | Service part / kit | buy | |
| 16.15.129 | Lifter guide housing | Service part / kit | buy | |
| 16.15.139 | Rocker arm adjusting screw | Service part / kit | buy | |
| 16.15.186 | Connecting rod capscrew | Service part / kit | buy | |
| 16.15.197 | Rocker arm shaft in removable bushing | Service part / kit | buy | |
| 16.15.348 | Counterweight to crankshaft capscrew | Service part / kit | buy | |
| 16.16.370 | Connecting rod big end | Service part / kit | buy | |
| 16.26.510 | Piston coolant pressure control valve | Service part / kit | buy | |
| 16.26.660 | Relief valve because of filter obstruction | Service part / kit | buy | |
| 16.27.860 | Lube oil pressure control valve | Service part / kit | buy | |
| 17.40.058 | Exhaust manifold to cylinder head capscrew | Service part / kit | buy | |
| 17.40.064 | Turbocharger to manifold nut | Service part / kit | buy | |
| 19.10.026 | Intake / exhaust valve seats | Service part / kit | buy | |
| 19.10.084 | Upper/Lower bore (liner housing) | Service part / kit | buy | |
| 19.10.086 | Cyl. head nut | Service part / kit | buy | |
| 19.10.091 | Liner | Service part / kit | buy | |
| 19.10.179 | Valve stem in removable guide | Service part / kit | buy | |
| 19.10.183 | Intake / exhaust valves | Service part / kit | buy | |
| 19.10.192 | Cyl. head stud | Service part / kit | buy | |
| 19.10.223 | Cylinder head stud to crankcase | Service part / kit | buy | |
| 19.10.232 | Cylinder head stud to crankcase | Service part / kit | buy | |
| 19.10.234 | Upper/Lower bore (liner housing) | Service part / kit | FridayParts $45.00 | |
| 19.10.241 | Intake / exhaust valve seats | Service part / kit | buy | |
| 19.10.243 | Intake / exhaust valves | Service part / kit | buy | |
| 19.10.244 | Intake / exhaust valve seats | Service part / kit | buy | |
| 19.10.246 | Valve stem in removable guide (Exhaust) | Service part / kit | buy | |
| 19.10.247 | Valve stem in removable guide (Intake) | Service part / kit | buy | |
| 19.10.262 | External spring | Service part / kit | buy | |
| 19.10.263 | Internal spring | Service part / kit | buy | |
| 19.10.287 | Intake / exhaust valves | Service part / kit | buy | |
| 19.10.294 | Cyl. head nut | Service part / kit | buy | |
| 19.10.296 | Valve stem in removable guide | Service part / kit | buy | |
| 19.15.026 | Crankpin | Service part / kit | buy | |
| 19.15.028 | Compression ring 1 | Service part / kit | buy | |
| 19.15.029 | Scraper ring 2 | Service part / kit | buy | |
| 19.15.031 | Oil control ring 3 | Service part / kit | buy | |
| 19.40.041 | Exhaust manifold to cylinder head capscrew | Service part / kit | buy | |
| 19.40.042 | Exhaust manifold to cylinder head capscrew | Service part / kit | buy | |
| 19.40.066 | Exhaust manifold to cylinder head capscrew | Service part / kit | buy | |
| 19.40.111 | Exhaust manifold to cylinder head capscrew | Service part / kit | buy | |
| 19.40.112 | Exhaust manifold to cylinder head capscrew | Service part / kit | buy | |
| 19.45.304 | Turbocharger to manifold nut | Service part / kit | buy | |
| 31.25.A50 | Oil Preheating System (230 V/50 Hz, 1500 W) | Service part / kit | buy | |
| 31.25.A60 | Oil Preheating System (400 V/50Hz, 1500 W) | Service part / kit | buy | |
| 31.25.C20 | Oil Preheating System (480 V/60Hz, 1500 W) | Service part / kit | buy | |
| 31.25.C40 | Oil Preheating System (480 V/60Hz, 1500 W) | Service part / kit | buy | |
| 31.25.C50 | Oil Preheating System (480 V/60Hz, 1500 W) | Service part / kit | buy | |
| 38.20.580 | 2x2000 W / 400V | Service part / kit | buy | |
| 38.20.590 | 2x2000 W / 480V | Service part / kit | buy | |
| 38.20.610 | 2x2000 W / 400V | Service part / kit | buy | |
| 38.20.620 | 2x2000 W / 480V | Service part / kit | buy | |
| 38.20.630 | 2x2000 W / 230V | Service part / kit | buy | |
| 38.20.640 | 2x2000 W / 400V | Service part / kit | buy | |
| 38.20.650 | 2x2000 W / 480V | Service part / kit | buy | |
| 38.20.660 | 2x2000 W / 230V | Service part / kit | buy | |
| 38.20.670 | 2x2000 W / 400V | Service part / kit | buy | |
| 38.20.680 | 2x2000 W / 480V | Service part / kit | buy | |
| 38.20.790 | 2x2000 W / 400V | Service part / kit | buy | |
| 38.20.800 | 2x2000 W / 480V | Service part / kit | buy | |
| 38.20.A50 | 2x1500 W / 480 V (UL) | Service part / kit | buy | |
| 38.20.B10 | 2x1500 W / 480V (UL) | Service part / kit | buy | |
| 70.10.453 | Exhaust manifold to cylinder head capscrew | Service part / kit | buy | |
| 70.12.303 | Vibration damper capscrew | Service part / kit | KuduParts $27.00 FridayParts $29.50 | |
| 70.40.562 | Screws crankshaft companion flange front | Service part / kit | buy | |
| 76.05.036 | licence dongle (USB) | Service part / kit | buy | |
| 76.05.037 | licence dongle (parallel port) | Service part / kit | buy | |
| 76.08.265 | CAN bus cable | Service part / kit | buy | |
| 76.41.297 | coded cable | Service part / kit | buy | |
| 76.64.316 | heating cable | Service part / kit | buy | |
| 99.42.186 | Turbocharger to manifold nut | Service part / kit | buy |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Available documents
Operator's manual — tp6990Reference (Kohler)Reference — G6-39 0918AZ (Kohler)Reference — Kohler-Gas Generators Brochure (Kohler)Reference — SB-616 1218S (Sb-616)Reference — tt1704 (Kohler)Owner's manual — tp7021 (Kohler)Service manual — TP-6994 1018B (Kohler)Service manual — sb616 (Kohler)Service manual — sb766 (Kohler)Service manual — tp6113 (Kohler)Service manual — tp6373 (Kohler)Service manual — tp7011 (Kohler)Service manual — tp7023 (Kohler)Service manual — tt1734 (Kohler)
This page was generated from the 15 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.