Home›Repair guides›Kohler›Modbus/Ethernet Converter Setup (MCP 3000)

Kohler — Modbus/Ethernet Converter Setup (MCP 3000)

Installation · MCP 3000 / Modbus-Ethernet converter

From a Kohler service manual covering: 1300REZCK, APM802, Decision-Maker 550, M340, MCP 3000, MPAC 1000, MPAC 1500, PM340. Check it applies to your exact model before use.

Applies to: Kohler 1300REZCK

Procedure

  1. Set IP Address 192.168.255.33.
  2. Set Protocol to Modbus/RTU, Master attached.
  3. Connect the Ethernet port on the MCP PLC to the Ethernet side of the converter.

Specs & values

  • IP Address 192.168.255.33

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →