Home›Iveco/FPT›Iveco/FPT GS CURSOR300S1

Iveco/FPT GS CURSOR300S1 Generator Set

The Iveco/FPT GS CURSOR300S1 is a Diesel generator set powered by a Iveco/FPT C10TE1D engine. It operates at 50 Hz. It holds about 27 L (7.1 gal) of oil and 63 L (16.6 gal) of coolant. The same C10TE1D engine also powers generator sets from Himoinsa and Hipower.

10.3 L
Displacement
27.0 L
Oil capacity
1
Document types

How to read your Iveco/FPT serial & model number →

Specifications

FuelDiesel
Frequency50.0 Hz
Standby kVA330
Oil capacity27.0 L

Engine

Iveco/FPT C10TE1D
Oil capacity27.0 L
Coolant capacity63.0 L
Displacement10.3 L
AspirationTAA
Rated speed1800 rpm

Same engine, other brands

2 brands

The Iveco/FPT C10TE1D in this set also powers 2 generator sets sold under 2 other brands. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.

BrandModels
HimoinsaHFW-305 T5
HipowerHDI-300F

Maintenance & consumables

for the Iveco/FPT C10TE1D
ItemSpecCapacityPart #Interval
Air filterHeavy-duty replaceable element air-cleaner—
Fuel filterStandard and secondary water separator with visible level on fuel filters—
Oil filterHeavy duty - single cartridge LUBRICATION SYSTEM—
Battery650CCA 850CA 115RC—
Belt—
OilSAE 10W-30 / ACEA E3/E50.1—600 hr
Spark plugN/A—

Service intervals

1
ItemActionHoursMonthsNotes
engine oilChange800 hrNEF Series mechanical

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Recommended fluids

FluidGradeStandardAmbientCapacityNotes
FuelDieselStandard and alternative fuels consistent

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Common questions

Which engine powers the Iveco/FPT GS CURSOR300S1?

The Iveco/FPT GS CURSOR300S1 is powered by the Iveco/FPT C10TE1D engine.

What kind of fuel does the Iveco/FPT GS CURSOR300S1 run on?

The Iveco/FPT GS CURSOR300S1 runs on Diesel.

How much oil does the Iveco/FPT GS CURSOR300S1 take?

The Iveco/FPT C10TE1D engine in the Iveco/FPT GS CURSOR300S1 has an oil capacity of 27.0 liters.

What is the coolant capacity of the Iveco/FPT GS CURSOR300S1?

The Iveco/FPT GS CURSOR300S1 cooling system holds 63 liters (16.6 US gallons) for the engine, per the manufacturer specification sheet.

Available documents

Reference — power-generation-fr (Iveco/FPT)

This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.