Specifications
| Fuel | Diesel |
|---|---|
| Standby power | 286 kW |
| Emissions | EPA/CARB TIER 3 |
| Oil capacity | 27.0 L |
| Voltage options | 24 V |
| Battery quantity | 2 |
| Coolant capacity | 15.0 L |
| Dimensions (L×W×H) | 2195×1055×1480 mm |
| Dry weight | 1110 kg |
Engine
| Oil capacity | 27.0 L |
|---|---|
| Coolant capacity | 63.0 L |
| Displacement | 10.3 L |
| Aspiration | TAA |
| Rated speed | 1800 rpm |
Same engine, other brands
2 brandsThe Iveco/FPT C10TE1D in this set also powers 4 generator sets sold under 2 other brands. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.
| Brand | Models |
|---|---|
| Hipower | HDI-300F, HFW 290 T6, HFW 300 T6 |
| Himoinsa | HFW-305 T5 |
Maintenance & consumables
for the Iveco/FPT C10TE1D| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Heavy-duty replaceable element air-cleaner | — | |||
| Fuel filter | Standard and secondary water separator with visible level on fuel filters | — | |||
| Oil filter | Heavy duty - single cartridge LUBRICATION SYSTEM | — | |||
| Battery | 650CCA 850CA 115RC | — | |||
| Belt | N/A | — | |||
| Oil | SAE 10W-30 / ACEA E3/E5 | 0.1 | — | 600 hr | |
| Spark plug | N/A | — |
Service intervals
1| Item | Action | Hours | Months | Notes |
|---|---|---|---|---|
| Engine oil | Change | 800 hr | NEF Series mechanical engines: up to 800h oil interval change |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Recommended fluids
| Fluid | Grade | Standard | Ambient | Capacity | Notes |
|---|---|---|---|---|---|
| Fuel | Diesel | Standard and alternative fuels consistent |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
How many kW is the Iveco/FPT C10 TE 1D?
The Iveco/FPT C10 TE 1D is rated 286 kW standby.
What engine does the Iveco/FPT C10 TE 1D use?
The Iveco/FPT C10 TE 1D is powered by the Iveco/FPT C10TE1D engine.
What fuel does the Iveco/FPT C10 TE 1D use?
The Iveco/FPT C10 TE 1D runs on Diesel.
What's the oil capacity on a Iveco/FPT C10 TE 1D?
The Iveco/FPT C10TE1D engine in the Iveco/FPT C10 TE 1D has an oil capacity of 27.0 liters.
What is the cooling system capacity of the Iveco/FPT C10 TE 1D?
The Iveco/FPT C10 TE 1D cooling system holds 15 liters (4.0 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the dry weight of the Iveco/FPT C10 TE 1D?
The Iveco/FPT C10 TE 1D has a dry weight of 1110 kg (2447 lb).
What voltages is the Iveco/FPT C10 TE 1D available in?
The Iveco/FPT C10 TE 1D is offered in 24 V.
What battery does the Iveco/FPT C10 TE 1D use?
The Iveco/FPT C10 TE 1D uses 2 batteryies, per the manufacturer specification sheet.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 50% | 43.6 | 36.6 |
| Prime | 80% | 63.8 | 219.8 |
| Prime | 100% | 76.3 | 210.0 |
Available documents
This page was generated from the 5 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.