Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby kVA | 330 |
| Emissions | Stage II / TIER 3 |
| Oil capacity | 27.0 L |
Engine
| Oil capacity | 27.0 L |
|---|---|
| Coolant capacity | 63.0 L |
| Displacement | 10.3 L |
| Aspiration | TAA |
| Rated speed | 1800 rpm |
Same engine, other brands
2 brandsThe Iveco/FPT C10TE1D in this set also powers 2 generator sets sold under 2 other brands. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.
| Brand | Models |
|---|---|
| Himoinsa | HFW-305 T5 |
| Hipower | HDI-300F |
Maintenance & consumables
for the Iveco/FPT C10TE1D| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Heavy-duty replaceable element air-cleaner | — | |||
| Fuel filter | Standard and secondary water separator with visible level on fuel filters | — | |||
| Oil filter | Heavy duty - single cartridge LUBRICATION SYSTEM | — | |||
| Battery | 650CCA 850CA 115RC | — | |||
| Belt | — | ||||
| Oil | SAE 10W-30 / ACEA E3/E5 | 0.1 | — | 600 hr | |
| Spark plug | N/A | — |
Service intervals
1| Item | Action | Hours | Months | Notes |
|---|---|---|---|---|
| Engine oil | Change | 800 hr | NEF Series mechanical engines: up to 800h oil interval change |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Recommended fluids
| Fluid | Grade | Standard | Ambient | Capacity | Notes |
|---|---|---|---|---|---|
| Fuel | Diesel | Standard and alternative fuels consistent |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
Which engine powers the Iveco/FPT GS CURSOR300?
The Iveco/FPT GS CURSOR300 is powered by the Iveco/FPT C10TE1D engine.
What kind of fuel does the Iveco/FPT GS CURSOR300 run on?
The Iveco/FPT GS CURSOR300 runs on Diesel.
What's the oil capacity on a Iveco/FPT GS CURSOR300?
The Iveco/FPT C10TE1D engine in the Iveco/FPT GS CURSOR300 has an oil capacity of 27.0 liters.
How much coolant does the Iveco/FPT GS CURSOR300 hold?
The Iveco/FPT GS CURSOR300 cooling system holds 63 liters (16.6 US gallons) for the engine, per the manufacturer specification sheet.
Available documents
This page was generated from the 2 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.