Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 375 kW |
| Standby kVA | 375 |
| Controller | PowerManager Digital Platform (PM-DCP) |
| Oil capacity | 31.0 L |
| Voltage options | 277/480 V, 600 V |
| Phase | 3-phase |
| Rated current | 564 A |
| Power factor | 0.8 |
| Circuit breaker | 541 A |
| Battery group | 2 |
| Battery voltage | 12 V |
| Battery quantity | 135 |
| Coolant capacity | 240.0 L |
Engine
| Oil capacity | 31.04 L |
|---|---|
| Coolant capacity | 83.3 L |
| Displacement | 11.9 L |
| Aspiration | Turbocharged and Aftercooled |
| Rated speed | 2280 rpm |
Maintenance & consumables
for the Generac 12.0 DTA| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Dry | — | |||
| Fuel filter | Optional | — | |||
| Oil filter | full flow and bypass | — | |||
| Coolant | Pressurized, Closed Recovery | 83.3 liters | — |
Common questions
How many kW is the Generac SD375?
The Generac SD375 is rated 375 kW standby (375.0 kVA).
Which engine powers the Generac SD375?
The Generac SD375 is powered by the Generac 12.0 DTA engine.
What kind of fuel does the Generac SD375 run on?
The Generac SD375 runs on Diesel.
How much oil does the Generac SD375 take?
The Generac 12.0 DTA engine in the Generac SD375 has an oil capacity of 31.04 liters.
What is the cooling system capacity of the Generac SD375?
The Generac SD375 cooling system holds 240 liters (63.4 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What voltages is the Generac SD375 available in?
The Generac SD375 is offered in 277/480 V, 600 V, 3-phase-phase.
What size battery does the Generac SD375 need?
The Generac SD375 uses 135 batteryies, 12 V each, group 2, per the manufacturer specification sheet.
Available documents
This page was generated from the 2 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.