Specifications
| Fuel | Bi-Fuel Diesel/Natural Gas |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 375 kW |
| Controller | PowerManager Digital Platform |
| Oil capacity | 31.04 L |
| Voltage options | 277/480 V, 345/600 V |
| Phase | 3-phase |
| Rated current | 564 A |
| Power factor | 0.8 |
| Coolant capacity | 83.27 L |
| Max ambient | 48.89 °C |
Engine
| Oil capacity | 31.04 L |
|---|---|
| Coolant capacity | 83.3 L |
| Displacement | 11.9 L |
| Aspiration | Turbocharged and Aftercooled |
| Rated speed | 2280 rpm |
Maintenance & consumables
for the Generac 12.0 DTA| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Dry | — | |||
| Fuel filter | Optional | — | |||
| Oil filter | full flow and bypass | — | |||
| Coolant | Pressurized, Closed Recovery | 83.3 liters | — |
Common questions
What size generator is the Generac MB375?
The Generac MB375 is rated 375 kW standby.
What engine is in the Generac MB375?
The Generac MB375 is powered by the Generac 12.0 DTA engine.
What fuel does the Generac MB375 use?
The Generac MB375 runs on Bi-Fuel Diesel/Natural Gas.
What's the oil capacity on a Generac MB375?
The Generac 12.0 DTA engine in the Generac MB375 has an oil capacity of 31.04 liters.
What is the coolant capacity of the Generac MB375?
The Generac MB375 cooling system holds 83.27 liters (22.0 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What voltages is the Generac MB375 available in?
The Generac MB375 is offered in 277/480 V, 345/600 V, 3-phase-phase.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Standby | 48% | 6.43 | 1.7 |
| Standby | 60% | 6.81 | 1.8 |
| Standby | 73% | 8.4 | 2.22 |
| Standby | 75% | 7.57 | 2.0 |
| Standby | 87% | 9.92 | 2.62 |
| Standby | 91% | 35.28 | 9.3 |
| Standby | 100% | 26.31 | 6.95 |
Available documents
Spec sheet — 0169180SBY (Generac)
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.