Service parts for the MLT4060KVLED
Grouped by system, with how many of each the parts manual calls for.
Oil system
1 requiredPrices captured from merchant listings; some links are affiliate links. Confirm against your serial number before ordering.
Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 6 kW |
| Emissions | Tier 4 Final |
| Controller | Analog controls, Power Zone Plus |
| Oil capacity | 5.1 L |
| Alternator | Marathon 201CSA5411 (Class F insulation) |
| Voltage options | 120/240 V |
| Phase | 1 |
| Rated current | 20 A |
| Circuit breaker | 30 A |
| Battery cranking | 440 CCA |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Max ambient | 49 °C |
| Dimensions (L×W×H) | 2870×2600×7520 mm |
| Dry weight | 943 kg |
| Wet weight | 1126 kg |
| Sound level | 68.0 dBA @ 7 m |
| Fuel tank | 213.5 L |
| Tank runtime | 187 hr |
Engine
| Oil capacity | 4.25 L |
|---|---|
| Coolant capacity | 3.78 L |
| Displacement | 1.001 L |
| Aspiration | Diesel |
| Rated speed | 1800 rpm |
Maintenance & consumables
for the Kubota D1005| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | — | ||||
| Fuel filter | Lubricate new element and its gasket, fill element with clean diesel fuel, spin on and hand tighten. DO NOT OVERTIGHTEN. Drain about 1/4 cup (60 ml) of fuel/sediment from drain plug at recommended interval. | — | |||
| Oil filter | 7665025430 | 1000 hr | Amazon $18.01 eBay $22.12 PartsGeek $7.98 | ||
| Battery | Sealed maintenance-free battery preferred for marine application; minimum cranking performance 360 CCA at 0 F (-18 C); nominal 12 volts. Maintain electrolyte to split-level marker with distilled water; charge if specific gravity below 1.215; stop charging at 1.260 at approximately 80 F (27 C). | — | |||
| Belt | Tension correct when finger pressure of 22 pounds (10 kg) at middle of belt deflects it about 0.4 inch (10 mm). Do not overtighten. | — | |||
| Coolant | 50/50 mixture of ethylene glycol anti-freeze and water; must contain rust and corrosion inhibitor and no stop-leak additive; use clean, low-mineral, distilled or soft water. Do not deviate from 50/50 mixture. Drain, flush and refill once a year. | 3.78 l | — | ||
| Coolant filter | — | ||||
| Oil | API classification CG-4, CF-4, CD/SG or CE/SG; viscosity per Table 1 (oil viscosity vs. temperature). Do not use synthetic or non-detergent oil. Check level before each start; do not operate below ADD or above FULL mark. | 4.25 l | — | ||
| Spark plug | — |
Compatible filters for the Kubota D1005 — cross-referenced via Donaldson. Options to verify against your serial number, not confirmed for this exact unit.
- Air filter: Kubota K318182240 Kubota K318182250 Donaldson P778979 Donaldson P780018 Wix 49978
Recommended fluids
| Fluid | Grade | Standard | Ambient | Capacity | Notes |
|---|---|---|---|---|---|
| Coolant | 50% glycol, 50% water | below 49°C | Standard mixture; 60/40 and heated options available for cold weather | ||
| Coolant | 50% glycol, 50% water or 60% glycol, 40% water | below 49°C | Liquid cooled engines with standard 50/50 mixture or optional cold-weather 60/40 configuration | ||
| Coolant | 50/50 glycol/water or 60/40 | below 49°C | Liquid cooled diesel engines |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Procedures
1RPM Quick Drain maintenance
Tools: RPM Quick Drain system hardware
- Convenient - no need to reach under machines
- Purges and extracts from the sump
- Evacuates sump directly to final containment via zero leak quick disconnect
- No spills, dripping filters, drain pans or intermediate containers needed
- Completes engine oil and filter change in less than 10 minutes
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
What is the power rating of the Generac MLT4060KVLED?
The Generac MLT4060KVLED is rated 6 kW standby.
What engine is in the Generac MLT4060KVLED?
The Generac MLT4060KVLED is powered by the Kubota D1005 engine.
What fuel does the Generac MLT4060KVLED use?
The Generac MLT4060KVLED runs on Diesel.
What is the oil capacity of the Generac MLT4060KVLED?
The Kubota D1005 engine in the Generac MLT4060KVLED has an oil capacity of 4.25 liters.
What alternator does the Generac MLT4060KVLED use?
The Generac MLT4060KVLED uses a Marathon 201CSA5411 alternator. Insulation class F.
Which oil filter part number does the Generac MLT4060KVLED take?
The Generac MLT4060KVLED uses oil filter part number 7665025430.
Which air filter part number does the Generac MLT4060KVLED take?
The Generac MLT4060KVLED uses air filter part numbers KUBOTA K318182240, KUBOTA K318182250.
Parts
27| Part # | Description | Qty | System | |
|---|---|---|---|---|
| 132-0375 | Sea Water Pump Impeller kit w/cover & gasket | Impeller | Amazon eBay FridayParts $26.00 | |
| 132-0379 | Sea Water Pump Impeller | Impeller | Amazon eBay $29.95 | |
| 149-2106 | Fuel Filter Element | 1 | Fuel filter | Amazon $15.99 eBay $34.99 KuduParts $68.00 |
| 185-5421 | Plug, Glow | 4 | Glow plug | Amazon eBay $35.00 |
| 185-5835 | Filter, Oil | 1 | Oil filter | Amazon $33.27 eBay $21.78 FridayParts $20.19 |
| 185-6934 | V-Belt | Belt | Amazon $108.61 eBay $70.52 | |
| 185-7268 | Glow Plug (24 Volt) | Glow plug | Amazon eBay | |
| 300-1500 | Fuel Filter | 1 | Fuel filter | Amazon eBay $36.60 |
| 323-1544 | Thermostat | 1 | Thermostat | Amazon eBay |
| 324-1491 | Oil Filter | 1 | Oil filter | Amazon eBay |
| 324-1542 | Fuel Injection Pump | 1 | Pump | Amazon eBay |
| 612-6673 | Water Pump | 1 | Pump | Amazon eBay |
| M1679-2 | TWO F U E L LINES IN TANK FITTING | Fuel line | Amazon eBay | |
| 100-3478-02 | Cruise Kit | 2 | Service part / kit | Amazon eBay |
| 130-4434 | Zinc Pencil | 1 | Service part / kit | Amazon $48.66 eBay $34.17 |
| 185-6721 | Breather Filter Element | 1 | Service part / kit | Amazon eBay |
| CS1312-1 | CROSS-SECTION VIEW HULL STRAINER SEA COCK RECOMMENDED WATER STRAINER OR FILTER FLUSH THROUGH-HULL FITTING TO GENSET | Service part / kit | Amazon Amazon eBay eBay | |
| G3907-8824-0 | Service part / kit | Amazon | ||
| J110-STD | Service part / kit | Amazon | ||
| J116-STD | Service part / kit | Amazon | ||
| J119-SA | Service part / kit | Amazon | ||
| J119-STD | Service part / kit | Amazon | ||
| J320-STD | Service part / kit | Amazon | ||
| J324-STD | Service part / kit | Amazon | ||
| S0310 | Service part / kit | Amazon | ||
| S0315 | Service part / kit | Amazon | ||
| S0520 | Service part / kit | Amazon |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Continuous | 1.14 | 0.301 | |
| Continuous | 100% | 2.23 | 0.59 |
| Prime | 100% | 2.23 | 0.59 |
| Standby | 1.14 | 0.301 | |
| Standby | 100% | 2.23 | 0.59 |