Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›MTU›Air filter — Removal and installation

MTU — Air filter — Removal and installation

Maintenance

From a MTU operator's manual covering: 20 V 4000 G23, 20 V 4000 G43, 20 V 4000 G63, 20V 4000, 20V 4000 Gx3. Check it applies to your exact model before use.

Applies to: MTU 20V 4000, MTU 20V 4000 Gx3 engine, MTU 20 V 4000 G23 engine, MTU 20 V 4000 G43 engine, MTU 20 V 4000 G63 engine, MTU 20V 4000 G83 engine

Parts for this job

Part numbers from the service-parts list for MTU 20V 4000. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Loosen clamp.
  2. Remove air filter and clamp from flange of intake housing.
  3. Verify no objects in flange of intake housing and clean it.
  4. Place new air filter with clamp onto intake housing.
  5. Tighten clamp.
  6. Reset signal ring of service indicator.

Full service-parts list: MTU 20V 4000 →

Source: MTU operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More MTU repair guides →