Kubota — Testing the GFCI Receptacle
Maintenance
From a Kubota operator's manual covering: GL 11000, GL 7000, GL 9000, GL11000, GL11000-STD, GL11000-USA, GL6000, GL6000-AUS, GL6000-STD, GL7000, GL7000-STD, GL7000-USA…. Check it applies to your exact model before use.
Applies to: Kubota GL 11000, Kubota GL 7000, Kubota GL 9000, Kubota GL11000-STD, Kubota GL11000-USA, Kubota GL6000, Kubota GL6000-AUS, Kubota GL6000-STD, Kubota GL7000-STD, Kubota GL7000-USA, Kubota Z482 / D722 engine, Kubota Z482 engine
Before you start
- Do not operate or store in wet or damp conditions.
Procedure
- Unplug all appliances from the GFCI receptacle.
- Start the engine.
- At the circuit breaker turn power ON to the circuit.
- Depress the TEST button; the RESET button should extend with a click.
- If the RESET button does not extend, contact your KUBOTA dealer.
- Depress the RESET button firmly until an audible click is heard.
- Perform this test on a regular monthly basis.
Tools required
- RECEPTACLE CIRCUIT TESTER Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Kubota GL 11000 →, Kubota GL 7000 →, Kubota GL 9000 →, Kubota GL11000-STD →, Kubota GL11000-USA →, Kubota GL6000 →, Kubota GL6000-AUS →, Kubota GL6000-STD →, Kubota GL7000-STD →, Kubota GL7000-USA →, Kubota Z482 engine →
Source: Kubota operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.