Kubota — Separating Engine and Generator
Repair & overhaul · Generator assembly
From a Kubota service manual covering: GL 11000, GL 7000, GL 9000, GL11000, GL11000-STD, GL11000-USA, GL6000, GL6000-AUS, GL6000-STD, GL7000, GL7000-STD, GL7000-USA…. Check it applies to your exact model before use.
Applies to: Kubota GL 11000, Kubota GL 7000, Kubota GL 9000, Kubota GL11000-STD, Kubota GL11000-USA, Kubota GL6000, Kubota GL6000-AUS, Kubota GL6000-STD, Kubota GL7000-STD, Kubota GL7000-USA, Kubota Z482-E2B-SEC-2 engine, Kubota Z482-E2B-SEC-3 engine
Procedure
- Disconnect the stator cables.
- Remove the air cleaner, muffler and radiator hoses.
- Remove the fan cover.
- Remove the generator cover and disconnect the wiring harness.
- Remove the generator mounting nuts and loosen the engine mounting nuts.
- Lift up the engine and remove the generator from generator fixed bolt.
- Remove the rear bracket, stator, front bracket and rotor.
Specs & values
- Generator mounting nut 19.6 to 27.4 N·m (GL6000 Amazon eBay $372.35 FridayParts $22.74, GL7000 FridayParts $55.99) / 53.9 to 68.6 N·m (GL9000 Amazon eBay FridayParts $15.80, GL11000 FridayParts $15.80)
Full service-parts list: Kubota GL 11000 →, Kubota GL 7000 →, Kubota GL 9000 →, Kubota GL11000-STD →, Kubota GL11000-USA →, Kubota GL6000 →, Kubota GL6000-AUS →, Kubota GL6000-STD →, Kubota GL7000-STD →, Kubota GL7000-USA →, Kubota Z482-E2B-SEC-2 engine →
Source: Kubota service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.