Kubota — Checking oil level and adding engine oil
Maintenance
From a Kubota owner's manual covering: GL 11000, GL 7000, GL 9000, GL11000, GL11000-STD, GL11000-USA, GL6000, GL6000-AUS, GL6000-STD, GL7000, GL7000-STD, GL7000-USA…. Check it applies to your exact model before use.
Applies to: Kubota GL 11000, Kubota GL 7000, Kubota GL 9000, Kubota GL11000-STD, Kubota GL11000-USA, Kubota GL6000, Kubota GL6000-AUS, Kubota GL6000-STD, Kubota GL7000-STD, Kubota GL7000-USA, Kubota Z482 / D722 engine, Kubota Z482 engine
Before you start
- Be sure to stop the engine before checking and changing the engine oil.
- Be sure to check the engine oil on a level surface.
Procedure
- Place the machine on a level surface.
- Check the engine oil level before starting or more than 5 minutes after stopping the engine.
- Remove the oil level gauge, wipe it clean and reinstall it.
- Take the oil level gauge out again and check the oil level.
- If the oil level is too low, remove the oil port and add new oil to the prescribed level.
- After adding oil, wait more than 5 minutes and check the oil level again.
Specs & values
- Engine oil level should be within the range of the lower end of the oil level gauge
Full service-parts list: Kubota GL 11000 →, Kubota GL 7000 →, Kubota GL 9000 →, Kubota GL11000-STD →, Kubota GL11000-USA →, Kubota GL6000 →, Kubota GL6000-AUS →, Kubota GL6000-STD →, Kubota GL7000-STD →, Kubota GL7000-USA →, Kubota Z482 engine →
Source: Kubota owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.