Kubota — Checking coolant level, adding coolant
Maintenance · radiator
From a Kubota owner's manual covering: GL 11000, GL 7000, GL 9000, GL11000, GL11000-STD, GL11000-USA, GL6000, GL6000-AUS, GL6000-STD, GL7000, GL7000-STD, GL7000-USA…. Check it applies to your exact model before use.
Applies to: Kubota GL 11000, Kubota GL 7000, Kubota GL 9000, Kubota GL11000-STD, Kubota GL11000-USA, Kubota GL6000, Kubota GL6000-AUS, Kubota GL6000-STD, Kubota GL7000-STD, Kubota GL7000-USA, Kubota Z482 engine, Kubota D722 engine
Before you start
- Place the machine on a level surface.
- DO NOT remove the radiator cap while coolant is hot.
Procedure
- Remove the radiator cap after the engine has completely cooled, and check that coolant reaches the supply port.
- Check the coolant level of the reserve tank between FULL and LOW marks.
- When the coolant level drops due to evaporation, add only 50/50 coolant up to the full level.
- Check the two drain plugs, one at the crankcase side and one at the lower part of the radiator.
Full service-parts list: Kubota GL 11000 →, Kubota GL 7000 →, Kubota GL 9000 →, Kubota GL11000-STD →, Kubota GL11000-USA →, Kubota GL6000 →, Kubota GL6000-AUS →, Kubota GL6000-STD →, Kubota GL7000-STD →, Kubota GL7000-USA →, Kubota Z482 engine →
Source: Kubota owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.