Kohler — Wheel Installation Procedure
Installation · Trailer wheel
From a Kohler operator's manual covering: 125REZGT, 30--125REZGT, 30REZG, 30REZGT, 50REZG, 70REZGT. Check it applies to your exact model before use.
Applies to: Kohler 125REZGT, Kohler 30REZG, Kohler 30REZGT, Kohler 50REZG, Kohler 70REZGT
Before you start
- Correct wheel torque prevents loose wheels, broken studs, and wheel/axle separation.
Procedure
- Start all wheel lug nuts by hand to prevent cross threading.
- Tighten the nuts in the sequence shown.
- Perform the wheel lug nut tightening sequence in stages using the torque value recommendations.
- Torque wheel lug nuts before the first road use and after each wheel removal.
- Check and retorque after the first 40 km (25 miles) and again at 120 km (75 miles), and at the specified service interval.
Tools required
- Torque wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Wheel lug nut torque 122 Nm (90 ft. lb.)
Full service-parts list: Kohler 125REZGT →, Kohler 30REZG →, Kohler 30REZGT →, Kohler 50REZG →, Kohler 70REZGT →
Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.