Kohler — Control Harness Connections
Installation · Control harnesses GM97197
From a Kohler service manual covering: 125REZGT, 145REOZT4, 175REOZT4, 30REZG, 35 REOZT4, 45 REOZT4, 50REZG, 55REOZT4, 70REZGT, GM88594-KP1-QS, REOZT4. Check it applies to your exact model before use.
Applies to: Kohler 125REZGT, Kohler 145REOZT4, Kohler 175REOZT4, Kohler 30REZG, Kohler 35 REOZT4, Kohler 45 REOZT4, Kohler 50REZG, Kohler 55REOZT4, Kohler 70REZGT
Before you start
- The control harness connections for GEN 1 and GEN 2 must correspond to the source camlock cable connections.
Procedure
- Connect the control harness from the generator set connected to the GEN 1 camlock connectors to GEN 1 CONTROL.
- Connect the control harness from the generator set connected to the GEN 2 camlock connectors to GEN 2 CONTROL.
- When not used, store the control harnesses on the storage rack inside the enclosure.
Specs & values
- Control harness length 7.6 m (25 ft.); two harnesses supplied with each box
Full service-parts list: Kohler 125REZGT →, Kohler 145REOZT4 →, Kohler 175REOZT4 →, Kohler 30REZG →, Kohler 35 REOZT4 →, Kohler 45 REOZT4 →, Kohler 50REZG →, Kohler 55REOZT4 →, Kohler 70REZGT →
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.