Home›Repair guides›Kohler›Clean Battery

Kohler — Clean Battery

Maintenance

From a Kohler operator's manual covering: 125REZGT, 30--125REZGT, 30REZG, 30REZGT, 50REZG, 70REZGT. Check it applies to your exact model before use.

Applies to: Kohler 125REZGT, Kohler 30REZG, Kohler 30REZGT, Kohler 50REZG, Kohler 70REZGT

Before you start

  • Wear protective goggles and clothing; battery acid may cause blindness and burn skin.

Procedure

  1. Clean the battery by wiping it with a damp cloth; keep connections dry and tight.
  2. If corrosion exists, disconnect the cables and remove corrosion with a wire brush.
  3. Clean the battery and cables with a solution of baking soda and water; do not allow the solution to enter battery cells.
  4. Flush with clean water and wipe with a dry cloth.
  5. After reconnecting the cables, coat the terminals with petroleum jelly, silicon grease, or other nonconductive grease.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Kohler 125REZGT →, Kohler 30REZG →, Kohler 30REZGT →, Kohler 50REZG →, Kohler 70REZGT →

Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →