Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Changing the Engine Air Cleaner

Generac IQ3500 — Changing the Engine Air Cleaner

Maintenance

For the Generac IQ3500, from the Generac owner's manual.

Applies to: Generac IQ3500, Generac GH-410 engine, Generac GT-530 engine, Generac GT-530 engine, Generac GT-990 engine, Generac GT-999 engine

Procedure

  1. With the generator shut down, lift the lid and remove the front panel.
  2. Remove the cover clips and air cleaner cover (11-20kW), or disengage the wire clip and open the access door (8kW).
  3. Pull out the old air filter and discard.
  4. Thoroughly clean the air cleaner enclosure of any dust or debris.
  5. Install a new air cleaner.
  6. Install the air cleaner cover and cover clips, or close the access door and engage the wire clip.

Full service-parts list: Generac IQ3500 →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →