Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Setting the Exercise Timer

Generac G-Force 1000 Series — Setting the Exercise Timer

Operation · Controller

For the Generac G-Force 1000 Series, from the Generac owner's manual.

Applies to: Generac G-Force 400 Series engine, Generac G-Force 800 Series engine, Generac G-Force 1000 Series engine

Before you start

  • Exercise feature operates only when generator is in AUTO.

Procedure

  1. Configure at the control panel or through the Mobile Link application.
  2. Set exercise day and time; unit runs approximately five minutes and then shuts down.
  3. Set exercise frequency to Weekly, Biweekly, or Monthly; if Monthly, select day 1–28.
  4. Enable or disable Quiet-Test low speed exercise profile as desired.

Specs & values

  • Exercise time length 5 minutes
  • Exercise frequency options: Weekly/Bi-Weekly/Monthly

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →