Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Post Maintenance Checks

Generac G-Force 1000 Series — Post Maintenance Checks

Maintenance · Generator

For the Generac G-Force 1000 Series, from the Generac owner's manual.

Applies to: Generac G-Force 400 Series engine, Generac G-Force 800 Series engine, Generac G-Force 1000 Series engine

Procedure

  1. Perform required maintenance procedure(s).
  2. Install intake side panel and front panel if removed.
  3. Install 7.5A fuse in control panel.
  4. Complete Install Wizard information.
  5. Press AUTO on control panel; allow unit to run one minute with no load if running during outage.
  6. Set MLCB (generator disconnect) to ON (CLOSED).
  7. Turn main utility disconnect ON (CLOSED).

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →