Generac G-Force 1000 Series — Performing Fuel System Leak Test
Maintenance
For the Generac G-Force 1000 Series, from the Generac owner's manual.
Applies to: Generac G-Force 400 Series engine, Generac G-Force 800 Series engine, Generac G-Force 1000 Series engine
Before you start
- Explosion and fire. Fuel and vapors are extremely flammable and explosive. No leakage of fuel is permitted.
Procedure
- Test the entire fuel system from supply to regulator.
- Spray all connection points with a non-corrosive gas leak detection fluid.
- Verify the solution is not blown away and does not form bubbles.
Tools required
- Non-corrosive gas leak detection fluid Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.