Generac — Engine Removal

Repair & overhaul

From a Generac service manual covering: QUIETPACT 55, QuietPact 65, QuietPact 75. Check it applies to your exact model before use.

Applies to: Generac QUIETPACT 55, Generac QuietPact 65, Generac QuietPact 75, Generac GTV-760 engine

Procedure

1. Perform rotor removal steps 1-17.
2. Drain engine oil.
3. Remove engine pulley bolt and remove engine pulley with steering wheel puller.
4. Remove five of six screws holding exhaust gaskets to tray.
5. Remove four exhaust manifold bolts.
6. Remove last screw holding exhaust gasket to tray.
7. Remove four engine mounting bolts.
8. Remove oil fill line mounting clamp.
9. Remove two oil lines to oil filter adapter.
10. Remove engine.

Full service-parts list: Generac QUIETPACT 55 →, Generac QuietPact 65 →, Generac QuietPact 75 →

Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →