Generac — Adjust Choke Solenoid
Adjustments · Choke assembly
From a Generac service manual covering: QUIETPACT 55, QuietPact 65, QuietPact 75. Check it applies to your exact model before use.
Applies to: Generac QUIETPACT 55, Generac QuietPact 65, Generac QuietPact 75, Generac GTV-760 engine
Procedure
- Loosen screws retaining choke solenoid to its bracket.
- Slide choke solenoid in slotted holes to adjust axial movement of solenoid plunger.
- Adjust until, with choke plate closed, solenoid is bottomed in its coil.
- Tighten the two screws; verify plunger and linkage move freely.
Specs & values
- Choke plate approximately 1/8 inch from full open position when solenoid not actuated
Full service-parts list: Generac QUIETPACT 55 →, Generac QuietPact 65 →, Generac QuietPact 75 →
Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.