Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Setting the Exercise Timer

Generac 8.1 GN — Setting the Exercise Timer

Operation · Control panel

For the Generac 8.1 GN, from the Generac owner's manual.

Applies to: Generac 8.1 GN, Generac GH-410 engine, Generac GT-530 engine, Generac GT-990 engine, Generac GT-999 engine

Before you start

  • Set to AUTO, the engine may crank and start at any time without warning.

Procedure

  1. Press Escape until the MAIN MENU displays; navigate with up/down arrows.
  2. Press Enter on the desired menu.
  3. Set the Day/Time for exercise start.
  4. Set exercise frequency to WEEKLY, BIWEEKLY or MONTHLY.
  5. If monthly, select the date of the month for exercise.
  6. Press the Control Panel AUTO button.

Specs & values

  • Exercise runs approximately 5 or 12 minutes depending on the model

Full service-parts list: Generac 8.1 GN →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →