Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Fischer Panda›Replacing the glow plugs

Fischer Panda Panda 4K PMS / Panda 5K PMS — Replacing the glow plugs

Repair & overhaul

For the Fischer Panda Panda 4K PMS / Panda 5K PMS, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda 4K PMS, Fischer Panda Panda 5K PMS, Kubota Z482 engine, Kubota EA300 engine

Before you start

  • Remove battery main switch; ensure generator cannot start accidentally

Procedure

  1. Open capsule.
  2. Remove three hex screws using 7 mm socket wrench.
  3. Remove glow plug connector.
  4. Loosen glow plug using socket wrench with long 10 mm socket.
  5. Remove glow plug.
  6. Reinstall in reverse order.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Fischer Panda Panda 4K PMS →, Fischer Panda Panda 5K PMS →, Kubota Z482 engine →

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →