Fischer Panda Panda 4K PMS / Panda 5K PMS — Replacing the electric starter
Repair & overhaul
For the Fischer Panda Panda 4K PMS / Panda 5K PMS, from the Fischer Panda owner's manual.
Applies to: Fischer Panda Panda 4K PMS, Fischer Panda Panda 5K PMS, Kubota Z482 engine, Kubota EA300 engine
Before you start
- Remove battery main switch; ensure generator cannot start accidentally
Procedure
- Open capsule.
- Pull off connector.
- Pull off rubber cap.
- Loosen hex nut with W.A.F. 13 mm and remove electric connections.
- Loosen lower attachment screw with hex socket wrench.
- Slide socket wrench with extensions under exhaust manifold and loosen upper attachment screw.
- Pull out electric starter.
- Reinstall in reverse order.
Tools required
- wrench W.A.F. 13 mm Amazon
- hex socket wrench set Amazon
- socket wrench with long and short extension and 6 mm socket Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Fischer Panda Panda 4K PMS →, Fischer Panda Panda 5K PMS →, Kubota Z482 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.