Fischer Panda Panda 4K PMS / Panda 5K PMS — Re-start with failure bypass switch
Operation
For the Fischer Panda Panda 4K PMS / Panda 5K PMS, from the Fischer Panda owner's manual.
Applies to: Fischer Panda Panda 4K PMS, Fischer Panda Panda 5K PMS, Kubota Z482 engine, Kubota EA300 engine
Before you start
- Avoid continual use of failure bypass switch
- Immediately check cause if generator cuts out under load
Procedure
- Check oil level with dipstick.
- Push button on front of generator.
- Start generator via remote control while button is depressed.
- If overheating caused stop, run several minutes without load to cool.
Full service-parts list: Fischer Panda Panda 4K PMS →, Fischer Panda Panda 5K PMS →, Kubota Z482 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.