Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Fischer Panda›Ventilating the fuel system

Fischer Panda Panda 15000 — Ventilating the fuel system

Maintenance

For the Fischer Panda Panda 15000, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda 15000, Fischer Panda Panda 15000i PMS generator, Kubota D902 engine

Before you start

  • Prevent escaping fuel running into the capsule.

Procedure

  1. Switch main power OFF.
  2. Press and hold failure bypass switch; fuel pump must be audible.
  3. Open ventilation screw at fuel solenoid valve while button pressed.
  4. Close screw when fuel runs without air bubbles; release button.
  5. Start engine; if it does not start, loosen injection line connecting nut and repeat.
  6. Retighten washers after start; switch main switch OFF.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Fischer Panda Panda 15000 →, Fischer Panda Panda 15000i PMS generator →, Kubota D902 engine →

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →