Home›Repair guides›Fischer Panda›Replacement of fuel filter

Fischer Panda Panda 15000 — Replacement of fuel filter

Maintenance

For the Fischer Panda Panda 15000, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda 15000, Fischer Panda Panda 15000i PMS generator, Kubota D902 engine

Before you start

  • A clogged filter causes decreased power output.

Procedure

  1. Clamp fuel inlet.
  2. Remove hoses from used filter and fit to new filter.
  3. Observe arrow on filter housing for fuel flow direction.
  4. For sight glass type: unscrew housing and filter element counterclockwise.
  5. Screw new element into mount.
  6. Lubricate sight glass O-ring with heat-resistant grease (Antiseize); refit sight glass clockwise.

Specs & values

  • Change at latest every 300 operating hours

Full service-parts list: Fischer Panda Panda 15000 →, Fischer Panda Panda 15000i PMS generator →, Kubota D902 engine →

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →