Specifications
| Fuel | diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby power | 12 kW |
| Standby kVA | 15 |
| Controller | Mics NEXYS |
| Oil capacity | 4.1 L |
| Alternator | FT2 MBS |
| Voltage options | 415/240 V, 400/230 V, 230/115 V |
| Phase | 3 |
| Rated current | 22 A |
| Power factor | 0.8 |
| Circuit breaker | 21 A |
| Battery group | 12 V |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Coolant capacity | 3.7 L |
| Dry weight | 294 kg |
| Sound level | 80.8 dBA @ 1 m |
| Fuel tank | 50.0 L |
Engine
| Oil capacity | 4.1 L |
|---|---|
| Coolant capacity | 3.7 L |
| Displacement | 0.95 L |
| Aspiration | Athmo |
| Rated speed | 3000 rpm |
Filters for the Mitsubishi L3E-SDH
2Engine-mounted filters the filter manufacturers list for this engine family. These come from the engine, not from this generator set’s own parts list, so confirm against your serial number before ordering.
| System | Filter | Description | Cross-references | |
|---|---|---|---|---|
| Oil filter | P502007 | Lube Filter, Spin-On Full Flow | MITSUBISHI 30A4000100, MITSUBISHI 30A4000100A, NAPA 67356, BALDWIN B1402 | FridayParts $13.99 |
Listed for this engine in only one kind of machine, so they may depend on how the engine was installed:
| System | Filter | Description | Cross-references | |
|---|---|---|---|---|
| Fuel / water separator | P551423 | Fuel Filter, Water Separator Spin-On | MITSUBISHI D070001, NAPA 3531, NAPA 600091, NAPA 600092 | KuduParts $18.00 FridayParts $20.00 |
Fault codes
8| Code | Name | Meaning | Severity | Action |
|---|---|---|---|---|
| 1 | Fallo presión de aceite | LED rojo (R) de visualización | Shutdown | |
| 2 | Fallo temperatura de agua | LED rojo (R) de visualización | Shutdown | |
| 3 | Fallo no arranque | LED rojo (R) de visualización | Shutdown | |
| 4 | Fallo sobrevelocidad | LED rojo (R) de visualización | Shutdown | |
| 5 | Grupo listo para suministrar | LED verde (V) de visualización | Info | |
| 6 | Fallo alternador de carga | LED rojo (R) de visualización | Shutdown | |
| 7 | Alarma general | LED amarillo (A) de visualización | Warning | |
| 8 | Fallo general | LED rojo (R) de visualización | Shutdown |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
How many kW is the SDMO T 15 HK?
The SDMO T 15 HK is rated 12 kW standby (15.0 kVA).
Which engine powers the SDMO T 15 HK?
The SDMO T 15 HK is powered by the Mitsubishi L3E-SDH engine.
What fuel does the SDMO T 15 HK use?
The SDMO T 15 HK runs on diesel.
How much oil does the SDMO T 15 HK take?
The Mitsubishi L3E-SDH engine in the SDMO T 15 HK has an oil capacity of 4.1 liters.
What is the cooling system capacity of the SDMO T 15 HK?
The SDMO T 15 HK cooling system holds 3.7 liters (1.0 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
How loud is the SDMO T 15 HK?
The SDMO T 15 HK is rated at 80.8 dBA at 1 m, per the manufacturer specification sheet.
How much does the SDMO T 15 HK weigh?
The SDMO T 15 HK has a dry weight of 294 kg (648 lb).
What size fuel tank does the SDMO T 15 HK have?
The SDMO T 15 HK has a 50 liter (13 US gallon) fuel tank.
What voltages is the SDMO T 15 HK available in?
The SDMO T 15 HK is offered in 415/240 V, 400/230 V, 230/115 V, 3-phase.
What battery does the SDMO T 15 HK use?
The SDMO T 15 HK uses 1 battery, 12 V each, group 12 V, per the manufacturer specification sheet.
What alternator comes on the SDMO T 15 HK?
The SDMO T 15 HK uses a FT2 MBS alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 75% | 1.7 | 0.45 |
| Standby | 75% | 4.2 | 1.11 |
Available documents
This page was generated from the 3 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.