HomeKohlerKohler ECV940

Kohler ECV940 Generator Set

The Kohler ECV940 is a generator set powered by a Kohler ECV940-0001 engine. It holds about 1.9 L (0.5 gal) of oil and 2.6 L (0.7 gal) of coolant.

0.999 L
Displacement
1.9 L
Oil capacity
4
Document types

How to read your Kohler serial & model number →

Specifications

Oil capacity1.9 L

Engine

Kohler ECV940-0001
Oil capacity1.9 L
Coolant capacity2.6 L
Displacement0.999 L

Maintenance & consumables

for the Kohler ECV940-0001
ItemSpecCapacityPart #Interval
Air filter150 hr
Fuel filter
Oil filter300 hr
BatteryCheck battery for state of charge, replace if necessary.
Belt
Coolant100 hr
Coolant filter
Oil300 hr
Spark plug500 hr

Common questions

What engine is in the Kohler ECV940?

The Kohler ECV940 is powered by the Kohler ECV940-0001 engine.

What's the oil capacity on a Kohler ECV940?

The Kohler ECV940-0001 engine in the Kohler ECV940 has an oil capacity of 1.9 liters.

Troubleshooting

6

Fault codes

CodeMeaning
0031Oxygen Sensor Heater Circuit High Voltage
0032Oxygen Sensor Heater Circuit Low Voltage
0107Manifold Absolute Pressure Sensor Circuit Low Voltage or Open
0108Manifold Absolute Pressure Sensor Circuit High Voltage
0112Intake Air Temperature Sensor Circuit Low Voltage
0113Intake Air Temperature Sensor Circuit High Voltage or Open

Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing. Full Kohler ECV940 troubleshooting guide (18 entries) →

Repair guides

2

Step-by-step procedures compiled from the Kohler service manual for this model.

Available documents

Engine spec — E-2130-E Command Pro 32.5-38HP 10028 (Kohler)Engine spec — Rehlko Command Pro 32.5–38 (Kohler)Reference — Gasoline Full line (Kohler)Owner's manual — 62 590 13 EN (Kohler)Owner's manual — 62 590 18 EN (Kohler)Service manual — 6028683 (Kohler)Service manual — 62 690 05 EN (Kohler)
Other sets with this engine