Home›Repair guides›Kohler›Crankcase Vacuum Test (manometer)

Kohler ECV940 / ECV980 — Crankcase Vacuum Test (manometer)

Testing & diagnosis · Crankcase breather

For the Kohler ECV940 / ECV980, from the Kohler service manual.

Applies to: Kohler ECV940, Kohler ECV980

Before you start

  • Carbon Monoxide can cause severe nausea, fainting or death. Never run engine indoors or in enclosed spaces.
  • Rotating Parts can cause severe injury. Stay away while engine is in operation.

Procedure

  1. Insert rubber stopper into oil fill hole; connect hose between stopper and one manometer tube; leave other tube open; check water level at 0 line.
  2. Start engine and run no-load high speed.
  3. Open clamp and note water level in tube; level in engine side should be minimum 10.2 cm (4 in.) above open side.
  4. Close pinch clamp before stopping engine.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Crankcase vacuum minimum 10.2 cm (4 in.) of water

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →