Kohler ECV940 / ECV980 — Check Oil Level
Maintenance · Lubrication System
For the Kohler ECV940 / ECV980, from the Kohler service manual.
Applies to: Kohler ECV940, Kohler ECV980
Before you start
- Never run engine with oil level below or above operating range indicator on dipstick.
Procedure
- Ensure engine is cool. Clean oil fill/dipstick areas of any debris.
- Remove dipstick; wipe oil off.
- Reinsert dipstick into tube; rest cap on tube, do not thread cap onto tube.
- Remove dipstick; check oil level should be at top of indicator.
- If oil is low, add oil up to top of indicator mark.
- Reinstall and secure dipstick.
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.