Service parts for the MD800
Grouped by system, with how many of each the parts manual calls for.
Prices captured from merchant listings; some links are affiliate links. Confirm against your serial number before ordering.
Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 800 kW |
| Standby kVA | 1000 |
| Prime power | 720 kW |
| Emissions | Tier 2 |
| Controller | InterliGen NT Display |
| Oil capacity | 100.0 L |
| Alternator | 800kW, 125°C, NEMA H |
| Voltage options | 277 V, 240 V, 120 V |
| Phase | 3 |
| Rated current | 2776 A |
| Power factor | 0.8 |
| Battery group | 8D |
| Battery voltage | 24 V |
| Battery quantity | 2 |
| Coolant capacity | 61 L |
| Max ambient | 40 °C |
| Dimensions (L×W×H) | 4369×2083×2362 mm |
| Dry weight | 8501 kg |
Engine
| Oil capacity | 26.4 L |
|---|---|
| Coolant capacity | 26.4 L |
| Displacement | 33.93 L |
| Aspiration | Turbo-charged, InterCooler |
| Rated speed | 1800 rpm |
Same engine, other brands
4 brandsThe Mitsubishi S12A2-Y2PTAW-2 in this set also powers 5 generator sets sold under 4 other brands. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.
| Brand | Models |
|---|---|
| Kohler | 750REOZM, 800REOZM |
| AKSA | APD-ULM800 |
| Rudox Power Generation | ERM800 |
| Simson-Maxwell | SMW800 T6-T2 |
Maintenance & consumables
for the Mitsubishi S12A2-Y2PTAW-2| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Dry | — | 2000 hr | ||
| Fuel filter | Cartridge | ×3 | — | 2000 hr | |
| Oil filter | 515.6 hrs, 3/7/24 | ×3 | GM32057 | Amazon eBay $9.99 | |
| Battery | Dual, 24 | ×2 | — | 2000 hr | |
| Belt | Level 1 Fan and Belt Guards | — | 2000 hr | ||
| Coolant | 303.0 L | — | |||
| Coolant filter | Clean Element | — | 2000 hr | ||
| Oil | 120.0 L | — | |||
| Spark plug | Bosch P Type x 2 | — | 2000 hr |
Common questions
What is the power rating of the Generac MD800?
The Generac MD800 is rated 800 kW standby (1000.0 kVA).
What engine is in the Generac MD800?
The Generac MD800 is powered by the Mitsubishi S12A2-Y2PTAW-2 engine.
Is the Generac MD800 diesel or gas?
The Generac MD800 runs on Diesel.
How much oil does the Generac MD800 take?
The Mitsubishi S12A2-Y2PTAW-2 engine in the Generac MD800 has an oil capacity of 26.4 liters.
What is the cooling system capacity of the Generac MD800?
The Generac MD800 cooling system holds 61 liters (16.1 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the prime power rating of the Generac MD800?
The Generac MD800 is rated 720 kW prime (900 kVA), against 800 kW standby.
How much does the Generac MD800 weigh?
The Generac MD800 has a dry weight of 8501 kg (18741 lb).
What voltages is the Generac MD800 available in?
The Generac MD800 is offered in 277 V, 240 V, 120 V, 3-phase.
How many cold cranking amps does the Generac MD800 require?
The Generac MD800 uses 2 batteryies, 24 V each, group 8D, per the manufacturer specification sheet.
Which alternator is fitted to the Generac MD800?
The Generac MD800 uses a 800kW, 125°C, NEMA H alternator.
Which oil filter part number does the Generac MD800 take?
The Generac MD800 uses oil filter part number GM32057.
Parts
1| Part # | Description | Qty | System | |
|---|---|---|---|---|
| 057-263 | DSE7410 MKII & DSE7420 MKII Operator Manual | 1 | Service part / kit | Amazon eBay |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Standby | 25% | 560.2 | 19.3 |
| Standby | 50% | 121.9 | 32.2 |
| Standby | 75% | 177.1 | 46.8 |
| Standby | 100% | 246.8 | 65.2 |
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.