Service parts for the ERM800
Grouped by system, with how many of each the parts manual calls for.
Prices captured from merchant listings; some links are affiliate links. Confirm against your serial number before ordering.
Specifications
| Frequency | 60.0 Hz |
|---|---|
| Standby power | 800 kW |
| Standby kVA | 1000 |
| Prime power | 720 kW |
| Controller | Woodward ProAct |
| Oil capacity | 26.4 L |
| Alternator | Stamford/AvK HCI634G |
| Voltage options | 3416 V, 480 V, 208 V, 240 V, 240/416 V, 277/480 V, 120/208 V, 138/240 V |
| Max ambient | 104 °C |
Engine
| Oil capacity | 26.4 L |
|---|---|
| Coolant capacity | 26.4 L |
| Displacement | 33.93 L |
| Aspiration | Turbo-charged, InterCooler |
| Rated speed | 1800 rpm |
Same engine, other brands
4 brandsThe Mitsubishi S12A2-Y2PTAW-2 in this set also powers 8 generator sets sold under 4 other brands. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.
| Brand | Models |
|---|---|
| Generac | 33.9L, MD750, MD800, SD800 |
| Kohler | 750REOZM, 800REOZM |
| AKSA | APD-ULM800 |
| Simson-Maxwell | SMW800 T6-T2 |
Maintenance & consumables
for the Mitsubishi S12A2-Y2PTAW-2| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Dry | — | 2000 hr | ||
| Fuel filter | Cartridge | ×3 | — | 2000 hr | |
| Oil filter | 515.6 hrs, 3/7/24 | ×3 | GM32057 | Amazon eBay $9.99 | |
| Battery | Dual, 24 | ×2 | — | 2000 hr | |
| Belt | Level 1 Fan and Belt Guards | — | 2000 hr | ||
| Coolant | 303.0 L | — | |||
| Coolant filter | Clean Element | — | 2000 hr | ||
| Oil | 120.0 L | — | |||
| Spark plug | Bosch P Type x 2 | — | 2000 hr |
Common questions
How many kW is the Rudox Power Generation ERM800?
The Rudox Power Generation ERM800 is rated 800 kW standby (1000.0 kVA).
What engine does the Rudox Power Generation ERM800 use?
The Rudox Power Generation ERM800 is powered by the Mitsubishi S12A2-Y2PTAW-2 engine.
What's the oil capacity on a Rudox Power Generation ERM800?
The Mitsubishi S12A2-Y2PTAW-2 engine in the Rudox Power Generation ERM800 has an oil capacity of 26.4 liters.
How much coolant does the Rudox Power Generation ERM800 hold?
The Rudox Power Generation ERM800 cooling system holds 26.4 liters (7.0 US gallons) for the engine, per the manufacturer specification sheet.
What is the continuous rating of the Rudox Power Generation ERM800?
The Rudox Power Generation ERM800 is rated 720 kW prime (900 kVA), against 800 kW standby.
What voltage does the Rudox Power Generation ERM800 produce?
The Rudox Power Generation ERM800 is offered in 3416 V, 480 V, 208 V, 240 V, 240/416 V, 277/480 V.
Which alternator is fitted to the Rudox Power Generation ERM800?
The Rudox Power Generation ERM800 uses a Stamford/AvK HCI634G alternator.
What oil filter fits the Rudox Power Generation ERM800?
The Rudox Power Generation ERM800 uses oil filter part number GM32057.
Parts
1| Part # | Description | Qty | System | |
|---|---|---|---|---|
| 057-263 | DSE7410 MKII & DSE7420 MKII Operator Manual | 1 | Service part / kit | Amazon eBay |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 50% | 121.13 | 32.0 |
| Prime | 75% | 175.64 | 46.4 |
| Standby | 100% | 244.92 | 64.7 |
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.