Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 300 kW |
| Standby kVA | 375 |
| Prime power | 270 kW |
| Emissions | EPA Certified Stationary Emergency |
| Controller | Digital G |
| Oil capacity | 30.0 L |
| Alternator | 520 mm |
| Voltage options | 120/208 V, 277/480 V, 346/600 V |
| Phase | Three-Phase |
| Rated current | 1000 A |
| Power factor | 0.8 |
| Circuit breaker | 1000 A |
| Battery group | 2 |
| Battery cranking | 1155 CCA |
| Battery voltage | 12 V |
| Battery quantity | 2 |
| Coolant capacity | 16.6 L |
| Max ambient | N/A °C |
| Dimensions (L×W×H) | 3454×1473×2667 mm |
| Dry weight | 7347 kg |
| Fuel tank | 105.0 L |
| Tank runtime | N/A hr |
Engine
| Oil capacity | 30.0 L |
|---|---|
| Coolant capacity | 49.2 L |
| Displacement | 10.3 L |
| Aspiration | Turbocharged/Aftercooled |
| Rated speed | 1800 rpm |
Maintenance & consumables
for the Iveco/FPT 10.3L| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Fuel filter | 5 | — | 9 hr | ||
| Oil filter | Full Flow | — | 9 hr | ||
| Battery | 2 | ×2 | — | 9 hr | |
| Belt | Fan Guard | — | 9 hr | ||
| Coolant | 50/50 Ethylene Glycol Antifreeze | 63.0 L | — | 9 hr | |
| Oil | 30 | 31.68 L | — | 9 hr | |
| Spark plug | 4-Valve | — | 9 hr |
Common questions
What size generator is the Generac MD300?
The Generac MD300 is rated 300 kW standby (375.0 kVA).
What engine does the Generac MD300 use?
The Generac MD300 is powered by the Iveco/FPT 10.3L engine.
What fuel does the Generac MD300 use?
The Generac MD300 runs on Diesel.
What's the oil capacity on a Generac MD300?
The Iveco/FPT 10.3L engine in the Generac MD300 has an oil capacity of 30.0 liters.
What is the cooling system capacity of the Generac MD300?
The Generac MD300 cooling system holds 16.6 liters (4.4 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the prime power rating of the Generac MD300?
The Generac MD300 is rated 270 kW prime (338 kVA), against 300 kW standby.
How much does the Generac MD300 weigh?
The Generac MD300 has a dry weight of 7347 kg (16197 lb).
How big is the fuel tank on the Generac MD300?
The Generac MD300 has a 105 liter (28 US gallon) fuel tank, giving about N/A hours of runtime.
What voltage does the Generac MD300 produce?
The Generac MD300 is offered in 120/208 V, 277/480 V, 346/600 V, Three-Phase-phase.
What size battery does the Generac MD300 need?
The Generac MD300 uses 2 batteryies, 12 V each, 1155 CCA, group 2, per the manufacturer specification sheet.
What alternator comes on the Generac MD300?
The Generac MD300 uses a 520 mm alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 25% | 26.1 | 6.9 |
| Prime | 50% | 43.9 | 11.6 |
| Prime | 75% | 59.8 | 15.8 |
| Prime | 100% | 75.3 | 19.9 |
| Standby | 25% | 28.7 | 7.6 |
| Standby | 50% | 47.7 | 12.6 |
| Standby | 75% | 65.87 | 17.4 |
| Standby | 100% | 83.7 | 22.1 |
Available documents
This page was generated from the 5 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.