HomeCummins/OnanCummins/Onan 10HQ-150R

Cummins/Onan 10HQ-150R Generator Set

The Cummins/Onan 10HQ-150R is a 10 kW standby generator set powered by a Continental F-162 engine. It is available at 250 V.

10 kW
Standby
1
Document types

How to read your Cummins/Onan serial & model number →

Specifications

Standby power10 kW
Voltage options250 V

Filters & service parts

model family
ItemSpecCapacityPart #Interval
Air filter6000 hr
Fuel filter6000 hr
Oil filter6000 hr
Battery12500 hr
Belt6000 hr
Coolant12500 hr
Coolant filter
Oil4.0 quarts6000 hr
Spark plug6000 hr

Compiled from this model's family documentation — may include parts for closely-related variants. Confirm the exact part for your serial number.

Common questions

What is the power rating of the Cummins/Onan 10HQ-150R?

The Cummins/Onan 10HQ-150R is rated 10 kW standby.

What engine does the Cummins/Onan 10HQ-150R use?

The Cummins/Onan 10HQ-150R is powered by the Continental F-162 engine.

Troubleshooting

6

Symptoms & remedies

SymptomCauseRemedy
Engine lacks power.Tighten cylinder head and spark plugs.<br>If still not corrected, grind the valves,<br>Replace piston rings, if necessary.Check the fuel system. Clean, adjust,<br>or replace parts necessary.
Engine misfires at light load.Carburetor idle adjustment Adjust, clean if needed,<br>set wrong or clogged.<br>Spark plug gaps too narrow. Adjust to correct gap.<br>Intake air leak.<br>Faulty ignition.<br>Tighten or replace gaskets,<br>Clean, adjust, or replace breaker points, plugs, condenser, etc., or retime ignition.<br>Uneven compression. Tighten cylinder head and spark plugs.<br>If still not corrected, grind valves,<br>Replace piston rings, if necessary.
Engine misfires at heavy load.Spark plugs defective. Replace.<br>Clean, adjust, or replace breaker points, plugs, condenser, etc., or retime ignition.<br>Clogged carburetor. Clean jets.<br>Clogged fuel screen. Clean.<br>Replace.<br>Faulty ignition.<br>Defective spark plug cables.
Engine misfires at all loads.Fouled spark plug. Clean and adjust.<br>Wrong or effective spark plug. Replace.<br>Ticking valves. Clean stems and guides.<br>Broken valve spring. Replace.<br>Defective ignition wires. Replace.<br>Effective or improperly adjusted Adjust or replace breaker points.
Low oil pressure.Oil too light. Drain, refill with proper oil.<br>Dil badly diluted. Drain, refill with proper oil.<br>Oil too low. Add oil.<br>Dil relief valve not seating. Remove and clean, or replace.<br>Badly worn bearings. Replace.<br>Sludge on oil screen. Remove and clean.<br>Badly worn oil pump. Replace.<br>Defective oil pressure gauge. Replace.
High oil pressure.Oil too heavy. Drain, refill with proper oil.<br>Slogged oil passage. Clean all lines and passages.<br>Oil relief valve stuck. Remove and clean.<br>Defective oil pressure gauge. Replace.

Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing. Full Cummins/Onan 10HQ-150R troubleshooting guide (24 entries) →

Repair guides

1

Step-by-step procedures compiled from the Cummins/Onan service manual for this model.

Parts

11
Part #DescriptionQtySystem
185-638Gasket Exhaust and Intake Manifold1Gasket Amazon eBay
185-749Gasket Cylinder Water Outlet1Gasket Amazon eBay
309-39Thermostat Coolant Water1Thermostat Amazon eBay
100P124Engine Replacement Assembly1Service part / kit Amazon eBay
10S-150/15ASwitchboardService part / kit buy
10S-150/16ASwitchboardService part / kit buy
10S-150/17ASwitchboardService part / kit buy
15S-150/15ASwitchboardService part / kit buy
15S-150/16ASwitchboardService part / kit buy
15S-150/17ASwitchboardService part / kit buy
185-507Shaft Assembly Magneto Drive1Service part / kit Amazon eBay

Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.

Available documents

Service manual — 921-0006 Onan HQ series Genset Instruction Manual (1960) (Cummins/Onan)